This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X15CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X15CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X15CA (Discontinued) → MBL40X15CA is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 15mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X15CA, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X15CA is a discontinued double-acting aluminum mini round cylinder with a 40mm bore and 15mm stroke. It delivers 628N of push force and 528N of pull force at 0.5MPa, making it a robust choice for compact actuation. The exact drop-in replacement is the MBL40X15CA, which matches the original bore, stroke, output force, G1/4 port, and CA pivot mounting.
This legacy model features a Ø16mm carbon-steel rod with 20µm hard-chrome plating and a heterogeneous two-way seal that retains grease. Unlike the older threaded front and back covers on the MAL, the MBL replacement uses a riveted rolling-packed body for equivalent durability. Because this specific SKU lacks an -S magnet, it cannot accept a position sensor. The fixed rubber bumper softens end-of-stroke impacts, though it does not lock the rod if air pressure is lost.
| Model | AirTAC MAL40X15CA (Discontinued) → MBL40X15CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X15CA |
| Bore size | Ø40 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X15CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X15CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×15 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Drives a short 15mm stamping stroke in a carton sealing press, utilizing the 880N push force at 0.7MPa to crease heavy cardboard.
Pushes a sorting arm on a parcel conveyor, where the CA pivot mounting absorbs side-play and the 628N force moves heavy boxes.
Applies a stopping force against pallets on a gravity roller track, using the compact 40mm body to fit within tight conveyor frame clearances.
To replace the MAL40X15CA, order the MBL40X15CA and confirm the CA pivot back cover, which allows the cylinder to swing on a pin for arcing loads. The port is G1/4 with a PT thread form, and the rod-end thread is M12x1.25. If you need to step down, the 32mm bore neighbor provides 402N push force at 0.5MPa; stepping up is not possible as 40mm is the largest MAL size. If adjustable cushioning is required for your application, look to the current MBLC line, as the MAL only has a fixed rubber bumper. For any position holding, install an external rod lock, as the bumper is not a locking mechanism.
Upgrade checklist
Yes, the MAL40X15CA is discontinued. The exact drop-in replacement is the MBL40X15CA, which matches the 40mm bore, 15mm stroke, CA pivot, and G1/4 port. The MBL uses a riveted rolling-packed body instead of the threaded covers found on the MAL.
The force figures are 628N push and 528N pull at 0.5MPa, 880N push at 0.7MPa, and a maximum theoretical 128kgf at 1.0MPa. The fixed rubber bumper only softens the end of stroke and does not hold the load if air is lost; you need an external rod lock for position holding.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X15CA replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X15CA replacement with price, stock and lead time, usually within 7-8 hours.