This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X260SCA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X260SCA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X260SCA (Discontinued) -> MBL40X260SCA is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 260mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X260SCA, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X260SCA is a discontinued double-acting aluminum mini round cylinder engineered for compact spaces. Delivering 628 N of push force at 0.5 MPa, it features a 40 mm bore, a 260 mm stroke, and a G1/4 port. The exact drop-in replacement is the MBL40X260SCA, matching the original bore, stroke, output force, and mounting hardware for a seamless swap.
This legacy unit features a built-in magnet (-S) for position sensing and a CA pivot back cover. The older MAL body relies on threaded front and back covers, whereas the current MBL upgrade uses a riveted rolling-packed body for equal rigidity. The -S magnet on this MAL pairs with legacy CS1-M or DS1-M reed switches; upgrading to the MBL requires switching to the modern CMSG, DMSG, or EMSG sensor family.
| Model | AirTAC MAL40X260SCA (Discontinued) -> MBL40X260SCA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X260SCA |
| Bore size | Ø40 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X260SCA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X260SCA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×260 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Drives the mechanical arms that fold corrugated carton flaps at 628 N push force, utilizing the CA pivot to self-align as the package height varies.
Actuates the hinged safety cover on a bulk sample centrifuge, where the 260 mm stroke provides full clearance and the -S magnet confirms gate closure.
Shifts the traversing yarn guide across a winding drum, relying on the 40 mm bore's 528 N pull force to maintain tension against the thread resistance.
To replace the MAL40X260SCA, order the MBL40X260SCA. Confirm the 40 mm bore, 260 mm stroke, G1/4 port, and default PT thread are retained. The CA pivot back cover is crucial here: it allows the cylinder to swing on a pin to absorb arcing loads, unlike a rigid flat-end U cover. Because the -S magnet is present, note that your existing CS1-M/DS1-M switches will not fit the MBL; you must update to CMSG/DMSG/EMSG sensors. The MAL uses a fixed rubber bumper, so if your application now needs end-of-stroke deceleration, step up to the MBLC variant for an adjustable air cushion.
For sizing flexibility, stepping down to the 32 mm bore drops your push force to 402 N at 0.5 MPa, while no larger mini-round bore exists in this family. At 260 mm stroke, the 16 mm rod is highly susceptible to side-load bending; you must use the CA pivot to self-align the rod or add an external guide rail. Remember that a plain bumper does not hold the load if air pressure drops; install a pilot-operated check valve for fail-safe positioning.
Upgrade checklist
Yes, the MAL40X260SCA is discontinued. The exact drop-in replacement is the MBL40X260SCA, offering identical 40 mm bore, 260 mm stroke, G1/4 port, CA pivot cover, and 628 N push force at 0.5 MPa. You will need to update your position sensors, as the MBL uses CMSG/DMSG/EMSG switches instead of the older CS1-M/DS1-M models.
The 40 mm bore utilizes a G1/4 port and a 16 mm carbon-steel rod with 20 um hard chrome plating. At 0.5 MPa, it generates 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force reaches 880 N, with a maximum theoretical output of 128 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X260SCA replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X260SCA replacement with price, stock and lead time, usually within 7-8 hours.