This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X40CA — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X40CA in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X40CA (Discontinued) → MBL40X40CA is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 40mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X40CA, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X40CA is a discontinued double-acting aluminum mini round cylinder engineered for compact spaces. Delivering 628 N of push force at 0.5 MPa, it features a 40 mm bore, a 40 mm stroke, and a G1/4 port. AirTAC replaced this legacy unit with the MBL40X40CA, a drop-in alternative that maintains the exact same bore, stroke, output force, port size, and CA mounting interface.
This specific SKU includes a CA pivot back cover that swings on a pin to accommodate arcing loads, distinguishing it from rigid flat-end U variants. Because this configuration lacks the -S magnet option, it cannot support a position sensor. Buyers should also note the construction upgrade: the legacy MAL uses threaded front and back covers, whereas the current MBL replacement features a riveted rolling-packed body for enhanced structural integrity.
| Model | AirTAC MAL40X40CA (Discontinued) → MBL40X40CA |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X40CA |
| Bore size | Ø40 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X40CA carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X40CA produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×40 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Provides 628 N of thrust at 0.5 MPa to eject stamped metal parts from a die, utilizing the CA pivot cover to tolerate slight angular misalignment during the stroke.
Actuates a swing gate on a packaging conveyor to sort small parcels, where the 40 mm stroke and 880 N push force at 0.7 MPa deliver rapid, decisive redirection.
Locks a lightweight pallet in place on an assembly line, using the 16 mm carbon-steel hard-chrome rod to withstand repeated impact without surface degradation.
To replace the MAL40X40CA, order the MBL40X40CA, ensuring you retain the PT thread form, G1/4 port, and CA pivot cover. If your application requires end-of-stroke cushioning, note that the MAL relies on a fixed rubber bumper; for an adjustable air cushion, step up to the current-line MBLC equivalent. If you need to downsize, the 32 mm bore neighbor provides 402 N of push force at 0.5 MPa, or you can step up to a larger profile cylinder for higher demands. Be aware that a plain cylinder does not hold its load when air is lost—the rod will drift—so integrate an external rod lock or pilot-operated check valve if gravity or vertical loads are present.
Upgrade checklist
Yes, the AirTAC MAL40X40CA is discontinued. The exact drop-in replacement is the MBL40X40CA, which matches the 40 mm bore, 40 mm stroke, 628 N push force, G1/4 port, and CA pivot mounting. You simply order the MBL equivalent to maintain your application.
At 0.5 MPa, the push force is 628 N and the pull force is 528 N; at 0.7 MPa, the push force is 880 N, with a theoretical maximum of 128 kgf at 1.0 MPa. Because this specific SKU lacks the -S magnet, it cannot accept a position sensor; if sensing is required, order an MBL40X40CA-S, which uses the current CMSG, DMSG, or EMSG switch families instead of the legacy CS1-M or DS1-M.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X40CA replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X40CA replacement with price, stock and lead time, usually within 7-8 hours.