This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X60CALB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X60CALB in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X60CALB (Discontinued) -> MBL40X60CALB is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 60mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X60CALB, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X60CALB is a discontinued double-acting aluminum mini round cylinder delivering 628 N push and 528 N pull at 0.5 MPa. It features a 40 mm bore, 60 mm stroke, and a G1/4 port. AirTAC replaced this legacy unit with the MBL40X60CALB, a drop-in alternative retaining the exact same force, port size, and LB foot mounting.
This specific SKU includes a CA pivot back cover that swings on a pin to absorb arcing loads, paired with an LB foot bracket for base mounting. Unlike the older threaded body design of the MAL, the modern MBL uses a riveted rolling-packed body. Note that this configuration lacks a magnet (-S), meaning it cannot accept a position sensor.
| Model | AirTAC MAL40X60CALB (Discontinued) -> MBL40X60CALB |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X60CALB |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X60CALB carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X60CALB produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×60 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Provides 628 N of push force at 0.5 MPa to fold and seal minor corrugated carton flaps on a continuous packaging line.
Uses the CA pivot back cover to safely absorb angular misalignment when knocking out small plastic parts from a mold cavity.
Actuates a heavy diverter gate using the LB foot mount, handling the 528 N pull load required to separate stacked empty pallets.
To replace the MAL40X60CALB, order the MBL40X60CALB. Verify your 40 mm bore, 60 mm stroke, G1/4 port, and PT tapered thread. Confirm the CA pivot back cover and LB foot bracket match your existing mechanical setup. Because this SKU lacks the -S magnet, it cannot support a position sensor; if you need end-of-stroke detection, the MBL replacement requires an -S variant and uses the newer CMSG/DMSG/EMSG switches instead of the legacy CS1-M/DS1-M. If you need to adjust force, stepping down to the 32 mm bore yields 402 N push at 0.5 MPa, while stepping up is unavailable as 40 mm is the largest mini round size. The fixed rubber bumper softens end-of-stroke impact but does not lock the rod; for position holding when air is lost, add an external rod lock. If you require adjustable cushioning, step up to the MBLC series.
Upgrade checklist
Yes, the MAL40X60CALB is discontinued. The exact drop-in replacement is the MBL40X60CALB, which matches the 40 mm bore, 60 mm stroke, 628 N push force at 0.5 MPa, G1/4 port, and LB foot mounting. The MBL upgrades the body to a riveted rolling-packed design instead of the older threaded covers.
At 0.5 MPa, it pushes with 628 N and pulls with 528 N. At 0.7 MPa, push is 880 N, with a maximum theoretical force of 128 kgf at 1.0 MPa. Because this specific SKU lacks the -S magnet, it cannot accept a position sensor; the MBL replacement with an -S magnet uses CMSG/DMSG/EMSG switches.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X60CALB replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X60CALB replacement with price, stock and lead time, usually within 7-8 hours.