This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X60SCASDB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X60SCASDB in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X60SCASDB (Legacy) → MBL40X60SCASDB is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 60mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X60SCASDB, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X60SCASDB is a discontinued double-acting aluminum mini round cylinder. Built for compact spaces, it delivers 628 N of push force at 0.5 MPa through a 40 mm bore. The exact drop-in replacement is the MBL40X60SCASDB, which matches the original stroke, G1/4 port, and SDB mounting. The legacy MAL features threaded front and back covers, whereas the modern MBL utilizes a riveted rolling-packed body for equally robust performance.
This specific SKU includes a CA pivot clevis back cover paired with an SDB pivot bracket to handle arcing loads. It carries an -S magnet for position sensing; however, buyers must note the sensor family change when upgrading. The old MAL works with CS1-M or DS1-M switches, while the new MBL requires CMSG, DMSG, or EMSG sensors. The Ø16 mm carbon-steel rod relies on a self-lubricating front-cover bearing guide to reduce friction.
| Model | AirTAC MAL40X60SCASDB (Legacy) → MBL40X60SCASDB |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X60SCASDB |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X60SCASDB carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X60SCASDB produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×60 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Drives the mechanical arm that folds heavy cardboard carton flaps, utilizing the 628 N push force at 0.5 MPa to overcome stiff paper resistance.
Actuates a routing gate on a logistics conveyor, where the CA pivot and SDB bracket safely absorb the arcing motion of the swinging arm.
Moves a testing probe head into position, relying on the -S magnet and DS1-M switch to verify the 60 mm stroke is fully extended before signaling the PLC.
To replace the MAL40X60SCASDB, order the MBL40X60SCASDB. Confirm your 60 mm stroke, PT thread, CA pivot back cover, and SDB pivot bracket are retained. If your application needs adjustable cushioning instead of the standard fixed rubber bumper, step up to the MBLC variant on the current line. Remember that a plain cylinder does not hold its load when air pressure drops; add an external rod lock for vertical safety.
For sizing flexibility, the next size down is the 32 mm bore (402 N push at 0.5 MPa), and the next size up is the 50 mm bore (not available in this mini series, requiring a profile cylinder). Because this 40 mm bore uses a G1/4 port, ensure your fittings match before swapping the unit.
Upgrade checklist
Yes, the MAL series is end-of-life. The exact drop-in replacement is the MBL40X60SCASDB. It matches the 40 mm bore, 60 mm stroke, G1/4 port, CA pivot cover, and SDB bracket. The main upgrade is the body construction: the MAL uses threaded covers while the MBL uses a riveted rolling-packed body.
At 0.5 MPa, the push force is 628 N and the pull force is 528 N. At 0.7 MPa, the push force increases to 880 N. The theoretical maximum force is 128 kgf at 1.0 MPa. Note that if your SKU has an -S magnet, the MBL replacement requires newer CMSG, DMSG, or EMSG sensors instead of the older CS1-M or DS1-M switches.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X60SCASDB replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X60SCASDB replacement with price, stock and lead time, usually within 7-8 hours.