This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is MBL40X700U — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the MBL40X700U in place of this model. The MBL replacement upgrades to a riveted rolling-packed body and the current CMSG / DMSG / EMSG sensor switches (the MAL used CS1-M / DS1-M).
The AirTAC AirTAC MAL40X700U Discontinued -> MBL40X700U is a double-acting aluminum-barrel mini round cylinder with a Ø40mm bore and 700mm stroke, G1/4 air ports and a fixed rubber bumper. This model is discontinued — the drop-in replacement is the MBL40X700U, which matches its bore, stroke, force and mounting.
The AirTAC MAL40X700U is a discontinued double-acting aluminum mini round cylinder with a 40mm bore and 700mm stroke. As a non-standard made-to-order stroke exceeding the 500mm maximum, it delivers 628N push and 528N pull at 0.5MPa, utilizing a G1/4 port and M12x1.25 rod thread. The direct drop-in replacement is the MBL40X700U, matching the exact force, port, and mounting dimensions.
This legacy unit features a U flat-end back cover for rigid mounting and lacks a magnet, meaning no position sensor can be fitted. Unlike the older threaded front and back covers on this MAL body, the modern MBL replacement uses a riveted rolling-packed body. Both share a fixed rubber bumper rather than an adjustable cushion; for end-of-stroke energy absorption in modern builds, AirTAC offers the MBLC variant.
| Model | AirTAC MAL40X700U Discontinued -> MBL40X700U |
|---|---|
| Series | MAL aluminum-barrel mini round cylinder (discontinued) |
| Replacement | MBL40X700U |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MAL datasheet (now discontinued). The MBL40X700U carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The MBL40X700U produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
| MAL | Aluminum-barrel mini round cylinder, double acting (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×700 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement mapping: MAL → MBL, MSAL → MSBL, MTAL → MTBL, MALD → MBLD, MALJ → MBLJ.
Pushes populated printed circuit boards across a 700mm transfer gap between inline SMT inspection machines, utilizing the 628N push force at 0.5MPa to overcome guide friction.
Traverses a yarn threading carriage across a wide loom beam, where the rigid U flat-end cover maintains strict perpendicularity against the 880N extension force at 0.7MPa.
Ejects packed blister-sealed medical trays from a 600mm deep accumulation chute, relying on the 528N retraction pull at 0.5MPa to consistently reset the long pusher arm.
To replace the MAL40X700U, order the MBL40X700U drop-in equivalent, confirming the 40mm bore, 700mm non-standard stroke, G1/4 port, default PT tapered thread, and rigid U flat-end rear cover. Because this SKU lacks an -S magnet, it cannot accept a CS1-M or DS1-M sensor; if position detection is needed on the new MBL, add the magnet and upgrade to CMSG, DMSG, or EMSG switches. If you need to step down, the 32mm bore neighbor provides 402N push at 0.5MPa; stepping up is not possible as 40mm is the largest in this mini series.
At 700mm, the 16mm rod is highly susceptible to bending under side loads; an external guide rail or a pivot bracket is strongly recommended to prevent premature seal wear. Remember that a plain MBL does not hold its load when air pressure drops—the rod will drift, as the rubber bumper only softens the end stop and provides no locking force.
Upgrade checklist
Yes, the MAL40X700U is discontinued. The exact drop-in replacement is the MBL40X700U, which matches the 40mm bore, 700mm stroke, 128kgf max force, G1/4 port, and U flat-end mounting. The MBL uses a riveted rolling-packed body instead of the older threaded covers, but the physical envelope and performance are identical.
The force ratings are 628N push and 528N pull at 0.5MPa, 880N push at 0.7MPa, and a maximum of 128kgf at 1.0MPa. Because this specific SKU does not have an -S magnet, it cannot accept a position sensor; the replacement MBL would need the -S option and CMSG, DMSG, or EMSG switches for detection.
Genuine AirTAC parts produced by AirTAC factory.
The MBL40X700U replaces this model 1:1.
MBL replacements usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Tell us the quantity and destination — we quote the drop-in MBL40X700U replacement with price, stock and lead time, usually within 7-8 hours.