This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ20X160-75S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ20 Adjustable Mini Cylinder MALJ20X160-75-S
The AirTAC Airtac MALJ20 Adjustable Mini Cylinder MALJ20X160-75-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 75 mm, giving a usable end-position window from 85 to 160 mm. This model is discontinued — the direct replacement is the MBLJ20X160-75-S.
- BoreØ20 mm
- Stroke160 mm
- Adjust window85–160 mm
- Port sizeG1/8
- Rod threadM8×1.25
- StatusDiscontinued → MBLJ20X160-75-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ20 Adjustable Mini Cylinder MALJ20X160-75-S
The AirTAC MALJ20X160-75-S is a discontinued double-acting, double-rod mini cylinder with a rear adjustable stroke stopper. The 75 mm adjust code creates a usable end-position window from 85 to 160 mm. The direct replacement is the MBLJ20X160-75-S, matching bore, stroke, force, and port.
This SKU includes the -S magnet, which uses the older CS1-M / DS1-M switches on the MAL body; the MBLJ upgrade moves to CMSG / DMSG / EMSG sensors. The MALJ uses threaded covers, while the MBLJ replacement features a riveted rolling-packed body. The adjuster is a travel stop, not a lock; it sets the end position but will not hold a load without live air. A fixed rubber bumper softens the end impact.
Airtac MALJ20 Adjustable Mini Cylinder MALJ20X160-75-S Technical Specifications
| Model | Airtac MALJ20 Adjustable Mini Cylinder MALJ20X160-75-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ20X160-75-S |
| Bore size | Ø20 mm |
| Stroke | 160 mm |
| Adjustable window | 85 – 160 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 300 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ20X160-75-S carries the same ratings.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ20X160-75-S matches these values.
Model Code: Airtac MALJ20 Adjustable Mini Cylinder MALJ20X160-75-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 20 | Bore size in mm (20/25/32/40). |
| ×160 | Nominal stroke length in mm. |
| -75 | Adjustable amount: trim the end to a 85–160 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ20 Adjustable Mini Cylinder MALJ20X160-75-S Is Used
Connector Seating Press
Fine-tune the crimp height on an automotive connector seating press by trimming 75 mm at the rear, ensuring the 132 N pull retracts the tool clear of the housing.
Label Applicator Tamp
Adjust the tamp stroke on a bottle labeling head to compensate for varying carton widths, using the rear screw to set a precise 120 mm reach without swapping hardware.
Replacing the Airtac MALJ20 Adjustable Mini Cylinder MALJ20X160-75-S with MBLJ20X160-75-S
To replace this MALJ20X160-75-S, order the direct replacement MBLJ20X160-75-S. Confirm the 20 mm bore, 160 mm stroke, 75 mm adjust code, G1/8 port, and PT thread. Mounting is FA or LB only; there is no back cover or SDB option. The -S magnet requires switching from CS1-M / DS1-M to CMSG / DMSG / EMSG switches. The adjuster is a stop, not a lock.
At 160 mm stroke, mind rod side-load and bending on long extensions; use guide rails to prevent binding.
Upgrade checklist
- ✓ Order the MBLJ20X160-75-S (same bore/stroke/adjust)
- ✓ Same 85–160 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ20X160-75-S instead of this discontinued model.
Airtac MALJ20 Adjustable Mini Cylinder MALJ20X160-75-S FAQ
Yes, the MALJ20X160-75-S is discontinued. The direct replacement is the MBLJ20X160-75-S, which matches the 20 mm bore, 160 mm stroke, 75 mm adjust code, G1/8 port, and force. You must update your sensors: the MAL -S magnet used CS1-M / DS1-M switches, while the MBLJ uses CMSG / DMSG / EMSG switches.
The 75 mm adjust code lets you trim the rear position, creating a usable stroke window from 85 mm to 160 mm. The adjuster is a travel stop, not a lock; it cannot hold a load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ20X160-75-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ20 Adjustable Mini Cylinder MALJ20X160-75-S → MBLJ20X160-75-S)
Tell us the quantity and destination — we quote the direct MBLJ20X160-75-S replacement with price, stock and lead time, usually within 7-8 hours.