This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ20X175-100S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ20 Adjustable Mini Cylinder MALJ20X175-100-S
The AirTAC Airtac MALJ20 Adjustable Mini Cylinder MALJ20X175-100-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 100 mm, giving a usable end-position window from 75 to 175 mm. This model is discontinued — the direct replacement is the MBLJ20X175-100-S.
- BoreØ20 mm
- Stroke175 mm
- Adjust window75–175 mm
- Port sizeG1/8
- Rod threadM8×1.25
- StatusDiscontinued → MBLJ20X175-100-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ20 Adjustable Mini Cylinder MALJ20X175-100-S
The AirTAC MALJ20X175-100-S is a discontinued double-acting, double-rod mini cylinder. It features a 20mm bore and a 175mm stroke. The rear adjuster lets you trim up to 100mm, creating a usable travel window of 75-175mm. The direct replacement is the MBLJ20X175-100-S, matching bore, stroke, force, G1/8 port, and mounting.
This -S magnet model originally used CS1-M/DS1-M switches; the MBLJ upgrade transitions to CMSG/DMSG/EMSG sensors. The MALJ uses threaded covers, while the MBLJ features a riveted rolling-packed body. The adjuster is a travel stop, not a lock; it sets the end position but will not hold a load without live air. End impact is softened by a fixed rubber bumper, not an adjustable air cushion.
Airtac MALJ20 Adjustable Mini Cylinder MALJ20X175-100-S Technical Specifications
| Model | Airtac MALJ20 Adjustable Mini Cylinder MALJ20X175-100-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ20X175-100-S |
| Bore size | Ø20 mm |
| Stroke | 175 mm |
| Adjustable window | 75 – 175 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 300 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ20X175-100-S carries the same ratings.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ20X175-100-S matches these values.
Model Code: Airtac MALJ20 Adjustable Mini Cylinder MALJ20X175-100-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 20 | Bore size in mm (20/25/32/40). |
| ×175 | Nominal stroke length in mm. |
| -100 | Adjustable amount: trim the end to a 75–175 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ20 Adjustable Mini Cylinder MALJ20X175-100-S Is Used
Wire Stripping Clamp
Adjust the end position to strip varying cable lengths precisely, leveraging the 8mm rod and M8x1.25 thread for a custom stripper jaw.
Leather Press Creaser
Tune the rear stopper to crease folded leather goods at different depths, relying on the fixed rubber bumper to soften the end impact.
Replacing the Airtac MALJ20 Adjustable Mini Cylinder MALJ20X175-100-S with MBLJ20X175-100-S
To replace the MALJ20X175-100-S, order the direct replacement MBLJ20X175-100-S. Confirm the 20mm bore, 175mm stroke, 100mm adjust code, G1/8 port, M8x1.25 rod thread, and FA/LB mounting (no back cover or SDB). The -S magnet changes the sensor family from CS1-M/DS1-M to CMSG/DMSG/EMSG. The adjuster is a travel stop, not a lock. For the 175mm stroke, prevent rod bending by ensuring rigid guide alignment to avoid side-load damage.
Upgrade checklist
- ✓ Order the MBLJ20X175-100-S (same bore/stroke/adjust)
- ✓ Same 75–175 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ20X175-100-S instead of this discontinued model.
Airtac MALJ20 Adjustable Mini Cylinder MALJ20X175-100-S FAQ
Yes, the MALJ20X175-100-S is discontinued. The direct replacement is the MBLJ20X175-100-S, which matches the 20mm bore, 175mm stroke, 100mm adjust, G1/8 port, and force. The MBLJ upgrades the body to a riveted rolling-packed design and changes the -S magnet switches from CS1-M/DS1-M to CMSG/DMSG/EMSG.
The 100mm adjust code creates a usable travel window from 75mm to 175mm. The adjuster is a travel stop, not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ20X175-100-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ20 Adjustable Mini Cylinder MALJ20X175-100-S → MBLJ20X175-100-S)
Tell us the quantity and destination — we quote the direct MBLJ20X175-100-S replacement with price, stock and lead time, usually within 7-8 hours.