This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ20X200-100S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ20 Adjustable Mini Cylinder MALJ20X200-100-S
The AirTAC Airtac MALJ20 Adjustable Mini Cylinder MALJ20X200-100-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 100 mm, giving a usable end-position window from 100 to 200 mm. This model is discontinued — the direct replacement is the MBLJ20X200-100-S.
- BoreØ20 mm
- Stroke200 mm
- Adjust window100–200 mm
- Port sizeG1/8
- Rod threadM8×1.25
- StatusDiscontinued → MBLJ20X200-100-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ20 Adjustable Mini Cylinder MALJ20X200-100-S
The AirTAC MALJ20X200-100-S is a discontinued double-acting mini cylinder with a 100mm rear adjuster, yielding a usable 100-200mm stroke window. The direct replacement is the MBLJ20X200-100-S, matching bore, force, G1/8 port, and mounting.
This -S magnet model uses CS1-M/DS1-M switches, while the MBLJ upgrade uses CMSG/DMSG/EMSG sensors. The MALJ has threaded covers, whereas the MBLJ features a riveted rolling-packed body. The rear adjuster is a travel stop, not a lock; it sets the end position but will not hold a load without live air. End impact is softened by a fixed rubber bumper, as there is no air cushion.
Airtac MALJ20 Adjustable Mini Cylinder MALJ20X200-100-S Technical Specifications
| Model | Airtac MALJ20 Adjustable Mini Cylinder MALJ20X200-100-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ20X200-100-S |
| Bore size | Ø20 mm |
| Stroke | 200 mm |
| Adjustable window | 100 – 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 300 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ20X200-100-S carries the same ratings.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ20X200-100-S matches these values.
Model Code: Airtac MALJ20 Adjustable Mini Cylinder MALJ20X200-100-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 20 | Bore size in mm (20/25/32/40). |
| ×200 | Nominal stroke length in mm. |
| -100 | Adjustable amount: trim the end to a 100–200 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ20 Adjustable Mini Cylinder MALJ20X200-100-S Is Used
Dispenser Nozzle Depth Setter
Trims the 200mm downstroke to a 150mm exact reach for filling varying bottle heights, ensuring the 132N pull retracts the nozzle cleanly before splash.
Small Parts Ejector
Adjusts the kick-out stroke on a stamping press to 120mm, preventing the rod end from hitting the die block while clearing thin blanks.
Replacing the Airtac MALJ20 Adjustable Mini Cylinder MALJ20X200-100-S with MBLJ20X200-100-S
To replace this MALJ20X200-100-S, order the direct replacement MBLJ20X200-100-S. Confirm the 20mm bore, 200mm stroke, 100mm adjust code, M8x1.25 rod thread, PT port form, and FA/LB mounting (no back cover or SDB). The -S magnet means switching from CS1-M/DS1-M to CMSG/DMSG/EMSG switches. The adjuster is a stop, not a lock.
Since 20mm is the smallest available MALJ bore, there is no smaller neighbour. At 200mm stroke, use a guide to prevent rod-bending side loads.
Upgrade checklist
- ✓ Order the MBLJ20X200-100-S (same bore/stroke/adjust)
- ✓ Same 100–200 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ20X200-100-S instead of this discontinued model.
Airtac MALJ20 Adjustable Mini Cylinder MALJ20X200-100-S FAQ
Yes, the MALJ20X200-100-S is discontinued. The direct replacement is the MBLJ20X200-100-S, which matches the 20mm bore, 200mm stroke, 100mm adjust code, force, and G1/8 port. You will only need to update your sensors from CS1-M/DS1-M to CMSG/DMSG/EMSG switches.
The 100mm adjuster lets you trim the end position, creating a usable 100-200mm stroke window. It acts as a travel stop, not a lock, so it will not hold a load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ20X200-100-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ20 Adjustable Mini Cylinder MALJ20X200-100-S → MBLJ20X200-100-S)
Tell us the quantity and destination — we quote the direct MBLJ20X200-100-S replacement with price, stock and lead time, usually within 7-8 hours.