This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ20X250-50, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ20 Adjustable Mini Cylinder MALJ20X250-50
The AirTAC Airtac MALJ20 Adjustable Mini Cylinder MALJ20X250-50 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 50 mm, giving a usable end-position window from 200 to 250 mm. This model is discontinued — the direct replacement is the MBLJ20X250-50.
- BoreØ20 mm
- Stroke250 mm
- Adjust window200–250 mm
- Port sizeG1/8
- Rod threadM8×1.25
- StatusDiscontinued → MBLJ20X250-50
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ20 Adjustable Mini Cylinder MALJ20X250-50
The AirTAC MALJ20X250-50 is a discontinued double-acting mini cylinder with a 50 mm rear adjuster, yielding a usable stroke window of 200-250 mm. The direct replacement is the MBLJ20X250-50, matching the G1/8 port, PT threads, and 32 kgf max force.
This SKU lacks a magnet (-S), so it cannot accept a position sensor. The rear adjuster is a travel stop, not a lock; it sets the end position but will not hold a load without live air. Upgrading to the MBLJ replaces the old threaded covers with a riveted rolling-packed body, though both rely on a fixed rubber bumper rather than an adjustable air cushion.
Airtac MALJ20 Adjustable Mini Cylinder MALJ20X250-50 Technical Specifications
| Model | Airtac MALJ20 Adjustable Mini Cylinder MALJ20X250-50 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ20X250-50 |
| Bore size | Ø20 mm |
| Stroke | 250 mm |
| Adjustable window | 200 – 250 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 300 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ20X250-50 carries the same ratings.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ20X250-50 matches these values.
Model Code: Airtac MALJ20 Adjustable Mini Cylinder MALJ20X250-50
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 20 | Bore size in mm (20/25/32/40). |
| ×250 | Nominal stroke length in mm. |
| -50 | Adjustable amount: trim the end to a 200–250 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ20 Adjustable Mini Cylinder MALJ20X250-50 Is Used
Textile Loom Tensioner
Trims the rest position of a yarn guide arm in a textile loom, allowing operators to fine-tune thread tension dynamically without swapping out the entire actuator.
Carton Flap Folder
Adjusts the folding stroke on a packaging line carton sealer, shortening the travel by up to 50 mm to accommodate varying box heights on the fly.
Replacing the Airtac MALJ20 Adjustable Mini Cylinder MALJ20X250-50 with MBLJ20X250-50
To replace this MALJ20X250-50, order the MBLJ20X250-50. Confirm the 20 mm bore, 250 mm stroke, 50 mm adjust code, G1/8 port, and FA/LB mounting (no back cover or SDB). Since this SKU has no -S magnet, you lose sensor capability; the MBLJ equivalent would use CMSG/DMSG/EMSG switches if you add one. The adjuster sets end position but does not lock the load.
At 250 mm stroke on an 8 mm rod, minimize side-load to prevent rod bending; use a guide rail for heavy loads.
Upgrade checklist
- ✓ Order the MBLJ20X250-50 (same bore/stroke/adjust)
- ✓ Same 200–250 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ20X250-50 instead of this discontinued model.
Airtac MALJ20 Adjustable Mini Cylinder MALJ20X250-50 FAQ
Yes, the MALJ20X250-50 is discontinued. The direct replacement is the MBLJ20X250-50, which matches the 20 mm bore, 250 mm stroke, 50 mm adjust code, and G1/8 port. The MBLJ upgrades the construction to a riveted rolling-packed body.
The 50 mm adjuster creates a usable stroke window of 200-250 mm. Note that the adjuster is a travel stop, not a lock, and cannot hold a load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ20X250-50 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ20 Adjustable Mini Cylinder MALJ20X250-50 → MBLJ20X250-50)
Tell us the quantity and destination — we quote the direct MBLJ20X250-50 replacement with price, stock and lead time, usually within 7-8 hours.