This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ20X85-10-S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ20 Adjustable Mini Cylinder MALJ20X85-10-S
The AirTAC Airtac MALJ20 Adjustable Mini Cylinder MALJ20X85-10-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 10 mm, giving a usable end-position window from 75 to 85 mm. This model is discontinued — the direct replacement is the MBLJ20X85-10-S.
- BoreØ20 mm
- Stroke85 mm
- Adjust window75–85 mm
- Port sizeG1/8
- Rod threadM8×1.25
- StatusDiscontinued → MBLJ20X85-10-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ20 Adjustable Mini Cylinder MALJ20X85-10-S
The AirTAC MALJ20X85-10-S is a discontinued adjustable-stroke mini cylinder. It is double-acting with a double rod, an 8mm rod-end thread (M8x1.25), and a G1/8 port. The 10mm rear adjuster yields a usable stroke window of 75-85mm. The direct replacement is the MBLJ20X85-10-S.
This unit uses a fixed rubber bumper, not an adjustable pneumatic cushion. The rear adjuster is a travel stop that sets the end position; it will not hold a load without live air. Upgrading to the MBLJ20X85-10-S replaces the threaded covers with a riveted rolling-packed body and upgrades the CS1-M/DS1-M magnet switches to the CMSG/DMSG/EMSG family.
Airtac MALJ20 Adjustable Mini Cylinder MALJ20X85-10-S Technical Specifications
| Model | Airtac MALJ20 Adjustable Mini Cylinder MALJ20X85-10-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ20X85-10-S |
| Bore size | Ø20 mm |
| Stroke | 85 mm |
| Adjustable window | 75 – 85 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 300 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ20X85-10-S carries the same ratings.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ20X85-10-S matches these values.
Model Code: Airtac MALJ20 Adjustable Mini Cylinder MALJ20X85-10-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 20 | Bore size in mm (20/25/32/40). |
| ×85 | Nominal stroke length in mm. |
| -10 | Adjustable amount: trim the end to a 75–85 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ20 Adjustable Mini Cylinder MALJ20X85-10-S Is Used
Dispenser Nozzle Height
Fine-tune the dispense nozzle height on an adhesive line within the 10mm window without adding physical spacer shims to the frame.
Light Lever Return
Actuate and return a light packaging machine lever, where the fixed rubber bumper absorbs the end impact without requiring air cushioning.
Replacing the Airtac MALJ20 Adjustable Mini Cylinder MALJ20X85-10-S with MBLJ20X85-10-S
Replace the MALJ20X85-10-S with the direct replacement MBLJ20X85-10-S. Confirm the 20mm bore, 85mm stroke, 10mm adjust code, G1/8 port, and PT thread form. Mounting is FA or LB only; there is no back cover or SDB option. The -S magnet changes sensor compatibility from CS1-M/DS1-M to CMSG/DMSG/EMSG. Remember the adjuster is a stop, not a lock; use an external lock for held loads.
Upgrade checklist
- ✓ Order the MBLJ20X85-10-S (same bore/stroke/adjust)
- ✓ Same 75–85 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ20X85-10-S instead of this discontinued model.
Airtac MALJ20 Adjustable Mini Cylinder MALJ20X85-10-S FAQ
Yes, the MALJ20X85-10-S is discontinued. The direct replacement is the MBLJ20X85-10-S, which matches the 20mm bore, 85mm stroke, 10mm adjuster, port, and force. The MBLJ upgrade uses a riveted rolling-packed body instead of threaded covers, and the -S magnet requires CMSG/DMSG/EMSG switches instead of the older CS1-M/DS1-M.
The 10mm rear adjuster lets you trim the end position, giving a usable stroke window of 75-85mm. The adjuster is a travel stop, not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ20X85-10-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ20 Adjustable Mini Cylinder MALJ20X85-10-S → MBLJ20X85-10-S)
Tell us the quantity and destination — we quote the direct MBLJ20X85-10-S replacement with price, stock and lead time, usually within 7-8 hours.