This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X160-100S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-100-S
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-100-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 100 mm, giving a usable end-position window from 60 to 160 mm. This model is discontinued — the direct replacement is the MBLJ32X160-100-S.
- BoreØ32 mm
- Stroke160 mm
- Adjust window60–160 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X160-100-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-100-S
The AirTAC MALJ32X160-100-S is a discontinued double-acting, double-rod mini cylinder. Its rear adjuster trims up to 100mm, providing a usable end-position window of 60-160mm.
This -S SKU uses the older CS1-M/DS1-M magnet switches, whereas the MBLJ upgrades to CMSG/DMSG/EMSG sensors. The MALJ features threaded covers and a fixed rubber bumper, while the MBLJ uses a riveted rolling-packed body. Remember, the adjuster is a travel stop, not a lock; it sets the end position but will not hold a load without live air.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-100-S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-100-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X160-100-S |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Adjustable window | 60 – 160 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X160-100-S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X160-100-S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-100-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×160 | Nominal stroke length in mm. |
| -100 | Adjustable amount: trim the end to a 60–160 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-100-S Is Used
PCB Router Depth Stop
Dial the 60-160mm window to set precise Z-axis plunge depth on a CNC router without swapping the 402N cylinder.
Conveyor Diverter Arm
Fine-tune the push distance of a packaging line diverter to handle varying carton widths on the fly.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-100-S with MBLJ32X160-100-S
To replace the MALJ32X160-100-S, select the MBLJ32X160-100-S. Confirm the 32mm bore, 160mm stroke, 100mm adjust code, G1/8 port, and PT thread form. Mounting is Basic, FA, or LB only; there is no back-cover or SDB option. Your -S magnet requires a sensor family change from CS1-M/DS1-M to CMSG/DMSG/EMSG.
At 160mm stroke, watch for rod-bending under side loads; use guide rails to prevent binding.
Upgrade checklist
- ✓ Order the MBLJ32X160-100-S (same bore/stroke/adjust)
- ✓ Same 60–160 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X160-100-S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-100-S FAQ
Yes, the MALJ32X160-100-S is discontinued. The direct replacement is the MBLJ32X160-100-S, which matches the 32mm bore, 160mm stroke, 100mm adjust code, and G1/8 port. You will need to upgrade your sensors from CS1-M/DS1-M to the CMSG/DMSG/EMSG family.
The 100mm adjuster creates a usable stroke window of 60-160mm. The adjuster is a travel stop, not a lock, so it will not hold a load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X160-100-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-100-S → MBLJ32X160-100-S)
Tell us the quantity and destination — we quote the direct MBLJ32X160-100-S replacement with price, stock and lead time, usually within 7-8 hours.