This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X160-30S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-30-S
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-30-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 30 mm, giving a usable end-position window from 130 to 160 mm. This model is discontinued — the direct replacement is the MBLJ32X160-30-S.
- BoreØ32 mm
- Stroke160 mm
- Adjust window130–160 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X160-30-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-30-S
The AirTAC MALJ32X160-30-S is a discontinued double-acting mini cylinder with a 32 mm bore and a 160 mm stroke. A rear screw lets you trim the end position by up to 30 mm, giving a usable travel window of 130-160 mm. The direct replacement is the MBLJ32X160-30-S, which matches the bore, stroke, adjust code, G1/8 port, and force ratings.
The rear adjuster is a travel stop, not a lock; it sets the end position but will not hold a load without live air. This -S SKU includes a magnet for CS1-M or DS1-M reed switches, whereas the MBLJ upgrade uses CMSG, DMSG, or EMSG sensors. The original MALJ features threaded covers and a fixed rubber bumper, while the newer MBLJ uses a riveted rolling-packed body. Mounting is limited to basic, FA, or LB styles with no back-cover or SDB options.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-30-S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-30-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X160-30-S |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Adjustable window | 130 – 160 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X160-30-S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X160-30-S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-30-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×160 | Nominal stroke length in mm. |
| -30 | Adjustable amount: trim the end to a 130–160 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-30-S Is Used
Carton Flap Plow
Trim the rear 30 mm stroke to position a cardboard flap plow blade at 145 mm, using the 346 N pull force to retract the blade cleanly between passing boxes on a packaging line.
Textile Fabric Press
Fine-tune the end position of a fabric edge presser by 30 mm to accommodate varying material rolls, relying on the fixed rubber bumper to soften the 563 N impact at 0.7 MPa.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-30-S with MBLJ32X160-30-S
To replace this MALJ32X160-30-S with the MBLJ32X160-30-S, confirm the 32 mm bore, 160 mm stroke, 30 mm adjust code, G1/8 port, and PT thread. Keep your FA or LB mounting, as no back-cover or SDB options exist. You must also swap your CS1-M or DS1-M sensors for CMSG, DMSG, or EMSG switches. The adjuster is a stop, not a lock, so add an external lock for held loads.
Upgrade checklist
- ✓ Order the MBLJ32X160-30-S (same bore/stroke/adjust)
- ✓ Same 130–160 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X160-30-S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-30-S FAQ
Yes, the MALJ32X160-30-S is discontinued. The direct replacement is the MBLJ32X160-30-S, which matches the 32 mm bore, 160 mm stroke, 30 mm adjust code, G1/8 port, and force ratings. You will need to upgrade your CS1-M or DS1-M switches to the CMSG, DMSG, or EMSG sensor family.
The usable stroke window is 130-160 mm, set by trimming the rear travel stop up to 30 mm. The adjuster is a stop, not a lock, and will not hold a load without air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X160-30-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-30-S → MBLJ32X160-30-S)
Tell us the quantity and destination — we quote the direct MBLJ32X160-30-S replacement with price, stock and lead time, usually within 7-8 hours.