This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X160-75, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-75
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-75 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 75 mm, giving a usable end-position window from 85 to 160 mm. This model is discontinued — the direct replacement is the MBLJ32X160-75.
- BoreØ32 mm
- Stroke160 mm
- Adjust window85–160 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X160-75
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-75
The AirTAC MALJ32X160-75 is a discontinued double-acting, double-rod mini cylinder with a 75mm rear travel stopper. The direct replacement is the MBLJ32X160-75, matching the 32mm bore, 160mm stroke, G1/8 port and mounting.
This SKU lacks a magnet, so it cannot accept position sensors. The rear adjuster sets the end position but does not hold the load without live air. Unlike the threaded covers on this MALJ, the MBLJ replacement uses a riveted rolling-packed body. Both use a fixed rubber bumper, not an adjustable cushion.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-75 Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-75 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X160-75 |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Adjustable window | 85 – 160 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X160-75 carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X160-75 matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-75
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×160 | Nominal stroke length in mm. |
| -75 | Adjustable amount: trim the end to a 85–160 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-75 Is Used
PCB Router Depth Stop
Dial the 85-160mm reach on a PCB depaneling router to set the exact Z-axis plunge without remounting hardware.
Pneumatic Press Tamp
Tamps labels onto recessed industrial containers by trimming the stroke window to prevent over-travel and label damage.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-75 with MBLJ32X160-75
To replace the MALJ32X160-75 with the MBLJ32X160-75, verify the 32mm bore, 160mm stroke, 75mm adjust code, PT G1/8 port, M10x1.25 rod-end thread, and FA/LB mounting. There is no back-cover or SDB option. Because this SKU has no -S magnet, it cannot take a sensor; if you need switches, the MBLJ upgrade requires CMSG/DMSG/EMSG sensors instead of the older CS1-M/DS1-M. Remember the adjuster is a travel stop, not a lock.
At 160mm stroke, watch rod-bending: use a guide to prevent side-load damage on the 12mm rod.
Upgrade checklist
- ✓ Order the MBLJ32X160-75 (same bore/stroke/adjust)
- ✓ Same 85–160 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X160-75 instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-75 FAQ
Yes, the MALJ32X160-75 is discontinued. The direct replacement is the MBLJ32X160-75, matching the 32mm bore, 160mm stroke, 75mm adjust code, G1/8 port and FA/LB mounting.
The 75mm adjuster trims the rear position, creating an 85-160mm usable window. It is a travel stop, not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X160-75 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X160-75 → MBLJ32X160-75)
Tell us the quantity and destination — we quote the direct MBLJ32X160-75 replacement with price, stock and lead time, usually within 7-8 hours.