This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X175-100, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X175-100
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X175-100 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 100 mm, giving a usable end-position window from 75 to 175 mm. This model is discontinued — the direct replacement is the MBLJ32X175-100.
- BoreØ32 mm
- Stroke175 mm
- Adjust window75–175 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X175-100
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X175-100
The AirTAC MALJ32X175-100 is a discontinued double-acting, double-rod mini cylinder with a 100mm rear adjustable stroke stopper, yielding a usable extension window of 75-175mm. The direct replacement is the MBLJ32X175-100, matching bore, stroke, adjuster, port, and force.
This SKU lacks a -S magnet and cannot accept a position sensor. The adjuster is a travel stop, not a lock, so it cannot hold a load without live air. It uses a fixed rubber bumper, not an adjustable air cushion. Upgrade details: the MALJ has threaded covers and uses CS1-M/DS1-M switches, whereas the MBLJ replacement features a riveted rolling-packed body and CMSG/DMSG/EMSG sensors.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X175-100 Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X175-100 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X175-100 |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Adjustable window | 75 – 175 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X175-100 carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X175-100 matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X175-100
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×175 | Nominal stroke length in mm. |
| -100 | Adjustable amount: trim the end to a 75–175 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X175-100 Is Used
Aluminum Extrusion Cut-off
Trim the saw stroke on an aluminum extrusion cut-off saw, using the rear stopper to fine-tune the 563N @0.7MPa cut reach without adding external physical blocks.
Pneumatic Press Sub-assembly
Set precise end positions for pressing bushings into pump housings, relying on the fixed rubber bumper to soften the 346N pull impact at the rear cover.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X175-100 with MBLJ32X175-100
Replace this MALJ32X175-100 with the direct replacement MBLJ32X175-100, confirming the 32mm bore, 175mm stroke, 100mm adjust code, G1/8 port, PT thread, and FA/LB mounting (no back cover or SDB allowed). Since this SKU lacks the -S magnet, it cannot take a sensor; the MBLJ upgrade enables CMSG/DMSG/EMSG switches. The adjuster sets the end position but does not hold load without air; use an external lock for held loads. At 175mm stroke, watch rod bending under side loads.
Upgrade checklist
- ✓ Order the MBLJ32X175-100 (same bore/stroke/adjust)
- ✓ Same 75–175 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X175-100 instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X175-100 FAQ
Yes, the MALJ32X175-100 is discontinued. The direct replacement is the MBLJ32X175-100, matching the 32mm bore, 175mm stroke, 100mm adjust code, G1/8 port, and FA/LB mounting. The MBLJ upgrades the body to a riveted rolling-packed design.
The 100mm adjuster trims the 175mm stroke, creating a usable 75-175mm window. The adjuster is a travel stop, not a lock; it cannot hold a load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X175-100 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X175-100 → MBLJ32X175-100)
Tell us the quantity and destination — we quote the direct MBLJ32X175-100 replacement with price, stock and lead time, usually within 7-8 hours.