This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X200-100, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 100 mm, giving a usable end-position window from 100 to 200 mm. This model is discontinued — the direct replacement is the MBLJ32X200-100.
- BoreØ32 mm
- Stroke200 mm
- Adjust window100–200 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X200-100
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100
The AirTAC MALJ32X200-100 is a discontinued double-acting, double-rod mini cylinder with a 32 mm bore and 200 mm stroke. The -100 adjust code lets you trim the rear travel stop by up to 100 mm, creating a usable 100-200 mm end-position window. The direct replacement is the MBLJ32X200-100, matching the bore, stroke, port, and force.
This SKU has no -S magnet and cannot accept a position sensor. Unlike the older threaded covers on the MALJ, the MBLJ replacement uses a riveted rolling-packed body. The fixed rubber bumper softens end impact, but the adjuster is a travel stop, not a lock; it will not hold a load without live air pressure.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100 Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X200-100 |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Adjustable window | 100 – 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X200-100 carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X200-100 matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×200 | Nominal stroke length in mm. |
| -100 | Adjustable amount: trim the end to a 100–200 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100 Is Used
PCB Router Depth Stop
Dial the end position from 100 to 200 mm to set precise routing depth on a PCB depaneling router without swapping cylinders or adding external stops.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100 with MBLJ32X200-100
To replace the MALJ32X200-100, order the exact direct replacement MBLJ32X200-100. Confirm the 32 mm bore, 200 mm stroke, -100 adjust code, G1/8 port, and PT thread form. Mounting is Basic, FA, or LB only (no back cover or SDB). Because this SKU lacks the -S magnet, it cannot take a sensor; if you need a switch, the MBLJ -S upgrade uses CMSG/DMSG/EMSG sensors instead of the older CS1-M/DS1-M. The adjuster sets the end position but does not hold load without air; use an external lock for holding.
At 200 mm stroke, minimize side loads to prevent rod bending.
Upgrade checklist
- ✓ Order the MBLJ32X200-100 (same bore/stroke/adjust)
- ✓ Same 100–200 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X200-100 instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100 FAQ
Yes, the MALJ32X200-100 is discontinued. The direct replacement is the MBLJ32X200-100, which matches the 32 mm bore, 200 mm stroke, -100 adjust code, G1/8 port, and mounting. The MBLJ upgrades the body to a riveted rolling-packed design from the older threaded covers.
The -100 adjust code lets you trim up to 100 mm at the rear, creating a usable 100-200 mm stroke window. The adjuster is a travel stop, not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X200-100 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-100 → MBLJ32X200-100)
Tell us the quantity and destination — we quote the direct MBLJ32X200-100 replacement with price, stock and lead time, usually within 7-8 hours.