This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X200-30, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-30
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-30 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 30 mm, giving a usable end-position window from 170 to 200 mm. This model is discontinued — the direct replacement is the MBLJ32X200-30.
- BoreØ32 mm
- Stroke200 mm
- Adjust window170–200 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X200-30
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-30
The AirTAC MALJ32X200-30 is a discontinued double-acting mini cylinder with a rear adjustable stroke stopper. It has a 32mm bore and 200mm stroke, but the -30 adjuster code lets you trim up to 30mm off the rear end position, yielding a usable stroke window of 170-200mm. The direct replacement is the MBLJ32X200-30, which matches the bore, stroke, G1/8 port, and 30mm adjust code.
This SKU lacks a magnet (-S), so it cannot take a position sensor. The original MALJ uses threaded covers and a heterogeneous grease-retaining seal, whereas the MBLJ upgrade features a riveted rolling-packed body. The rear adjuster is a travel stop, not a lock; it sets the end position but will not hold a load without live air. Impact is absorbed by a fixed rubber bumper, meaning there is no adjustable air cushion.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-30 Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-30 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X200-30 |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Adjustable window | 170 – 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X200-30 carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X200-30 matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-30
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×200 | Nominal stroke length in mm. |
| -30 | Adjustable amount: trim the end to a 170–200 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-30 Is Used
PCB Router Z-Axis Depth
Dial the 170-200mm reach window to set exact Z-axis plunge depth on a PCB depaneling router without adding external mechanical stops.
Pneumatic Press Tonnage
Adjust the end position on a small pneumatic press to control the 346N pull stroke, ensuring consistent crimp depth without swapping fixturing.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-30 with MBLJ32X200-30
To replace the MALJ32X200-30, order the exact direct replacement MBLJ32X200-30. Confirm the 32mm bore, 200mm stroke, 30mm adjust code, PT G1/8 port, and M10x1.25 rod-end thread. Mounting is limited to FA or LB; there is no back cover or SDB option. Because this SKU lacks the -S magnet, it cannot accept a sensor; if you need sensing, the MBLJ replacement with a magnet uses the newer CMSG/DMSG/EMSG switches instead of the older CS1-M/DS1-M.
At a 200mm stroke, minimize side-load to prevent rod bending. Remember the adjuster is a stop, not a lock; use an external lock for held loads.
Upgrade checklist
- ✓ Order the MBLJ32X200-30 (same bore/stroke/adjust)
- ✓ Same 170–200 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X200-30 instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-30 FAQ
Yes, the MALJ32X200-30 is discontinued. The direct replacement is the MBLJ32X200-30, which matches the 32mm bore, 200mm stroke, 30mm adjust code, and G1/8 port. The MBLJ upgrades the body to a riveted rolling-packed design from the original threaded covers.
The -30 adjust code provides a usable stroke window of 170-200mm by trimming up to 30mm at the rear. The adjuster is a travel stop, not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X200-30 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-30 → MBLJ32X200-30)
Tell us the quantity and destination — we quote the direct MBLJ32X200-30 replacement with price, stock and lead time, usually within 7-8 hours.