This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X200-40S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40-S
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 40 mm, giving a usable end-position window from 160 to 200 mm. This model is discontinued — the direct replacement is the MBLJ32X200-40-S.
- BoreØ32 mm
- Stroke200 mm
- Adjust window160–200 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X200-40-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40-S
The AirTAC MALJ32X200-40-S is a discontinued double-acting, double-rod mini cylinder with a 32 mm bore and 200 mm stroke. It features a 40 mm rear adjuster, creating a usable stroke window of 160-200 mm so you can dial in the exact end position without external stops. The direct replacement is the MBLJ32X200-40-S, matching the bore, stroke, adjuster, and G1/8 port.
This -S SKU includes a magnet for legacy CS1-M / DS1-M switches, while the MBLJ replacement upgrades to CMSG / DMSG / EMSG sensors. The MALJ uses threaded covers and a fixed rubber bumper, whereas the MBLJ features a riveted rolling-packed body. Remember that the rear adjuster is a travel stop, not a lock; it sets the end position but will not hold a load without live air pressure.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40-S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X200-40-S |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Adjustable window | 160 – 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X200-40-S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X200-40-S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×200 | Nominal stroke length in mm. |
| -40 | Adjustable amount: trim the end to a 160–200 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40-S Is Used
Carton Flap Folder Stroke Trim
Adjust the rear stopper by up to 40 mm to tune carton flap folding reach on a packaging line, accommodating varied box heights without swapping out the entire cylinder assembly.
Leather Pressing Head Positioning
Fine-tune the pressing head reach on a leather embossing machine, using the 346 N pull force to maintain consistent material tension while avoiding over-compression of the hide.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40-S with MBLJ32X200-40-S
To replace the MALJ32X200-40-S, order the direct replacement MBLJ32X200-40-S. Confirm the 32 mm bore, 200 mm stroke, 40 mm adjust code, G1/8 port, M10x1.25 rod thread, and FA/LB mounting (there is no back cover or SDB option). If migrating sensors, note the switch family changes from CS1-M / DS1-M to CMSG / DMSG / EMSG. The rear adjuster is a travel stop, not a lock, so add an external locking device for holding loads safely.
With a 200 mm stroke on a 12 mm rod, minimize side loads to prevent rod bending and premature seal wear.
Upgrade checklist
- ✓ Order the MBLJ32X200-40-S (same bore/stroke/adjust)
- ✓ Same 160–200 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X200-40-S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40-S FAQ
Yes, the MALJ32X200-40-S is discontinued. The direct replacement is the MBLJ32X200-40-S, which matches the 32 mm bore, 200 mm stroke, 40 mm adjuster, and G1/8 port. The MBLJ upgrades the body to a riveted rolling-packed design and uses CMSG / DMSG / EMSG sensors instead of the older CS1-M / DS1-M switches.
The usable stroke window is 160-200 mm, meaning you can trim the end position by up to 40 mm at the rear. The adjuster is a travel stop, not a lock, and the cylinder uses a fixed rubber bumper.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X200-40-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-40-S → MBLJ32X200-40-S)
Tell us the quantity and destination — we quote the direct MBLJ32X200-40-S replacement with price, stock and lead time, usually within 7-8 hours.