This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X200-50, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-50
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-50 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 50 mm, giving a usable end-position window from 150 to 200 mm. This model is discontinued — the direct replacement is the MBLJ32X200-50.
- BoreØ32 mm
- Stroke200 mm
- Adjust window150–200 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X200-50
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-50
The AirTAC MALJ32X200-50 is a discontinued 32mm bore adjustable-stroke mini cylinder. The direct replacement is the MBLJ32X200-50, which matches the bore, stroke, adjust code, G1/8 port and mounting.
This SKU lacks a magnet (-S) and cannot accept a position sensor. The original MALJ uses threaded covers and a CS1-M/DS1-M sensor family, while the MBLJ upgrade features a riveted rolling-packed body and CMSG/DMSG/EMSG switches. The adjuster acts purely as a travel stop to set the end position and does not hold the load without live air pressure. End impact is softened by a fixed rubber bumper, not an adjustable air cushion.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-50 Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-50 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X200-50 |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Adjustable window | 150 – 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X200-50 carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X200-50 matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-50
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×200 | Nominal stroke length in mm. |
| -50 | Adjustable amount: trim the end to a 150–200 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-50 Is Used
Dispenser Valve Shut-Off Timing
Fine-tune the retraction distance of a 32mm bore actuator on an adhesive dispensing line, pulling back 346N to break the fluid string cleanly before the conveyor indexes.
Packaging Flap Tucking Arm
Adjust the end position on the fly for a carton tucking arm, accommodating various box heights while the fixed rubber bumper absorbs the 563N impact at 0.7MPa without bouncing.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-50 with MBLJ32X200-50
To replace this MALJ32X200-50, order the exact direct replacement MBLJ32X200-50. Confirm the 32mm bore, 200mm stroke, 50mm adjust code, G1/8 port, PT thread form, and FA/LB mounting (no back cover or SDB allowed). Because this SKU has no -S magnet, it cannot take a sensor; if you need position detection, step up to an MBLJ32X200-50S and use CMSG/DMSG/EMSG switches instead of the older CS1-M/DS1-M.
Remember the adjuster is a travel stop, not a lock; it will not hold a load without air pressure. For a 200mm stroke, ensure your mounting prevents rod side-load to avoid bending the 12mm rod.
Upgrade checklist
- ✓ Order the MBLJ32X200-50 (same bore/stroke/adjust)
- ✓ Same 150–200 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X200-50 instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-50 FAQ
Yes, the MALJ32X200-50 is discontinued. The direct replacement is the MBLJ32X200-50, which matches the 32mm bore, 200mm stroke, 50mm adjust code, and G1/8 port. The MBLJ upgrades the body to a riveted rolling-packed design and uses CMSG/DMSG/EMSG sensors if you add a magnet.
The 50mm adjuster creates a usable stroke window of 150-200mm. Note that the adjuster is a travel stop, not a lock, and cannot hold a load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X200-50 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-50 → MBLJ32X200-50)
Tell us the quantity and destination — we quote the direct MBLJ32X200-50 replacement with price, stock and lead time, usually within 7-8 hours.