This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X200-75S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-75-S
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-75-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 75 mm, giving a usable end-position window from 125 to 200 mm. This model is discontinued — the direct replacement is the MBLJ32X200-75-S.
- BoreØ32 mm
- Stroke200 mm
- Adjust window125–200 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X200-75-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-75-S
The AirTAC MALJ32X200-75-S is a discontinued double-acting, double-rod mini cylinder with a 32 mm bore and 200 mm stroke. It features a rear screw stopper that lets you trim up to 75 mm off the end position, giving a usable stroke window of 125-200 mm without external stops. The direct replacement is the MBLJ32X200-75-S, which matches the bore, stroke, 75 mm adjust code, G1/8 port, and mounting footprint exactly.
This -S SKU includes a magnet for position sensing. The original MALJ works with CS1-M / DS1-M switches, while the MBLJ replacement upgrades to CMSG / DMSG / EMSG sensors. The MALJ uses threaded covers, whereas the MBLJ features a riveted rolling-packed body. The fixed rubber bumper softens end impact, but the adjuster is a travel stop, not a lock, so it will not hold a load without live air.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-75-S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-75-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X200-75-S |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Adjustable window | 125 – 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X200-75-S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X200-75-S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-75-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×200 | Nominal stroke length in mm. |
| -75 | Adjustable amount: trim the end to a 125–200 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-75-S Is Used
Carton Flap Folding Arm
Adjust the rear stopper by up to 75 mm to time a carton sealing flap-folding arm perfectly, preventing over-travel without needing to remount the 32 mm cylinder.
Textile Fabric Edge Guide
Trim the stroke window down to 125 mm to tension and guide moving fabric edges on a textile winding machine, relying on the fixed rubber bumper to absorb high-speed impacts.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-75-S with MBLJ32X200-75-S
To replace the MALJ32X200-75-S, order the exact direct replacement MBLJ32X200-75-S. Confirm the 32 mm bore, 200 mm stroke, 75 mm adjust code, G1/8 PT port, and M10x1.25 rod-end thread. Mounting remains Basic, FA, or LB only, as there is no back-cover or SDB option. Remember the rear adjuster is a stop, not a lock. At 200 mm stroke, minimize side-load to prevent rod bending.
Upgrade checklist
- ✓ Order the MBLJ32X200-75-S (same bore/stroke/adjust)
- ✓ Same 125–200 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X200-75-S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-75-S FAQ
Yes, the MALJ32X200-75-S is discontinued. The direct replacement is the MBLJ32X200-75-S, matching the 32 mm bore, 200 mm stroke, 75 mm adjust code, G1/8 port, and mounting. You must upgrade your sensors: the MALJ -S magnet uses CS1-M / DS1-M switches, while the MBLJ uses CMSG / DMSG / EMSG switches.
The 75 mm adjust code lets you trim the rear end position, creating a usable stroke window of 125-200 mm. The adjuster is a travel stop, not a lock, and will not hold a load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X200-75-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X200-75-S → MBLJ32X200-75-S)
Tell us the quantity and destination — we quote the direct MBLJ32X200-75-S replacement with price, stock and lead time, usually within 7-8 hours.