This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X225-10S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-10-S
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-10-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 10 mm, giving a usable end-position window from 215 to 225 mm. This model is discontinued — the direct replacement is the MBLJ32X225-10-S.
- BoreØ32 mm
- Stroke225 mm
- Adjust window215–225 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X225-10-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-10-S
The AirTAC MALJ32X225-10-S is a discontinued double-acting, double-rod mini cylinder with a 32 mm bore, 225 mm stroke, and a 10 mm rear adjuster, yielding a usable travel window of 215-225 mm. The direct replacement is the MBLJ32X225-10-S, matching the bore, stroke, force, G1/8 port, and mounting.
This -S SKU includes a magnet for CS1-M or DS1-M reed switches; the MBLJ upgrade shifts to CMSG, DMSG, or EMSG sensors and swaps the original threaded covers for a riveted rolling-packed body. The rear screw is a travel stop to fine-tune reach, not a lock—it will not hold a load without live air. End impact is softened by a fixed rubber bumper, as there is no adjustable air cushion.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-10-S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-10-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X225-10-S |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Adjustable window | 215 – 225 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X225-10-S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X225-10-S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-10-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×225 | Nominal stroke length in mm. |
| -10 | Adjustable amount: trim the end to a 215–225 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-10-S Is Used
Carton Flap Folder
Trims the 10 mm end position to tuck varying corrugated box flaps at speed, relying on the fixed rubber bumper to absorb the repetitive impact.
Label Applicator Platen
Micro-adjusts the 225 mm reach to press adhesive labels onto curved plastic bottles, ensuring the CS1-M sensor flags the exact extend signal.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-10-S with MBLJ32X225-10-S
To replace the MALJ32X225-10-S with the MBLJ32X225-10-S, confirm the 32 mm bore, 225 mm stroke, 10 mm adjust code, G1/8 PT port, M10x1.25 rod thread, and FA or LB mounting (there is no back cover or SDB option). Retain the -S magnet, but note the sensor family changes from CS1-M/DS1-M to CMSG/DMSG/EMSG. The adjuster sets the end position but does not lock the load.
At 225 mm, the 12 mm rod is moderately extended; ensure lateral loads are minimized to prevent rod bending and premature seal wear.
Upgrade checklist
- ✓ Order the MBLJ32X225-10-S (same bore/stroke/adjust)
- ✓ Same 215–225 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X225-10-S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-10-S FAQ
Yes, the MALJ32X225-10-S is discontinued. The direct replacement is the MBLJ32X225-10-S, which matches the 32 mm bore, 225 mm stroke, 10 mm adjuster, and G1/8 port. You must upgrade your sensors from CS1-M/DS1-M to CMSG/DMSG/EMSG switches for the new riveted body.
The 10 mm rear adjuster creates a usable stroke window of 215-225 mm. The adjuster is a travel stop, not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X225-10-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-10-S → MBLJ32X225-10-S)
Tell us the quantity and destination — we quote the direct MBLJ32X225-10-S replacement with price, stock and lead time, usually within 7-8 hours.