This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X225-100, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-100
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-100 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 100 mm, giving a usable end-position window from 125 to 225 mm. This model is discontinued — the direct replacement is the MBLJ32X225-100.
- BoreØ32 mm
- Stroke225 mm
- Adjust window125–225 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X225-100
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-100
The AirTAC MALJ32X225-100 is a discontinued double-acting double-rod cylinder with a 32 mm bore and a 225 mm stroke. Its rear screw stopper trims up to 100 mm, giving a usable end-position window of 125-225 mm. The direct replacement is the MBLJ32X225-100, matching the bore, stroke, adjust code, and G1/8 port.
This SKU lacks the -S magnet, so it cannot take a position sensor. The adjuster sets travel but does not hold load without live air. Upgrading to the MBLJ32X225-100 changes the sensor family to CMSG/DMSG/EMSG if needed, and swaps the threaded covers for a riveted rolling-packed body. The fixed rubber bumper softens end impact without acting as an air cushion.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-100 Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-100 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X225-100 |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Adjustable window | 125 – 225 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X225-100 carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X225-100 matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-100
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×225 | Nominal stroke length in mm. |
| -100 | Adjustable amount: trim the end to a 125–225 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-100 Is Used
PCB Router Depth Stop
Dials the cutting head reach on a printed circuit board router.
Carton Flap Plow
Adjusts the stroke on a packaging line plow to tuck varying carton flap depths. The 100 mm trim range adapts to different box heights on the fly without external stops.
Aluminum Extrusion Saw
Sets the clamp reach on a cut-off saw. The 32 mm bore provides 563 N at 0.7 MPa to hold the profile, while the rear stopper fine-tunes the cut position.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-100 with MBLJ32X225-100
To replace this MALJ32X225-100, order the MBLJ32X225-100. Confirm the 32 mm bore, 225 mm stroke, 100 mm adjust code, PT G1/8 port, and FA/LB mounting (no back cover or SDB). Since this SKU lacks an -S magnet, it cannot accept a sensor. If you add one on the MBLJ, use CMSG/DMSG/EMSG switches. The rear adjuster is a travel stop, not a lock.
Upgrade checklist
- ✓ Order the MBLJ32X225-100 (same bore/stroke/adjust)
- ✓ Same 125–225 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X225-100 instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-100 FAQ
Yes, the MALJ32X225-100 is discontinued. The direct replacement is the MBLJ32X225-100, matching the 32 mm bore, 225 mm stroke, 100 mm adjust code, and G1/8 port. The MBLJ upgrades the threaded covers to a riveted rolling-packed body.
The -100 adjust code lets you trim the rear position by up to 100 mm, creating a usable stroke window from 125 mm to 225 mm. The adjuster is a travel stop, not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X225-100 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X225-100 → MBLJ32X225-100)
Tell us the quantity and destination — we quote the direct MBLJ32X225-100 replacement with price, stock and lead time, usually within 7-8 hours.