This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X30-10, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X30-10
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X30-10 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 10 mm, giving a usable end-position window from 20 to 30 mm. This model is discontinued — the direct replacement is the MBLJ32X30-10.
- BoreØ32 mm
- Stroke30 mm
- Adjust window20–30 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X30-10
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X30-10
The AirTAC MALJ32X30-10 is a discontinued double-acting mini cylinder with a 10mm rear adjustable stroke stopper. The direct replacement is the MBLJ32X30-10, matching the 32mm bore, 30mm stroke, G1/8 port, and mounting.
This SKU lacks a magnet (-S) and cannot accept a position sensor. The adjuster is a travel stop, not a lock, so it will not hold a load without live air. It uses a fixed rubber bumper and threaded covers, whereas the MBLJ upgrade features a riveted rolling-packed body.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X30-10 Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X30-10 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X30-10 |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Adjustable window | 20 – 30 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X30-10 carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X30-10 matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X30-10
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×30 | Nominal stroke length in mm. |
| -10 | Adjustable amount: trim the end to a 20–30 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X30-10 Is Used
PCB Depaneling Saw Stop
Dials the blade contact depth in a 20-30mm window.
Connector Seating Press
Fine-tunes the exact seating depth of pin headers. Because the 10mm adjuster acts only as a travel stop, an external lock is required if the press assembly must hold position during an air loss.
Wire Crimp Height Calibration
Sets the precise bottom dead center for terminal crimping. The 32mm bore provides 346N pull force to retract the crimp anvil, and the rear stopper allows 10mm of micro-adjustment without changing the cylinder body.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X30-10 with MBLJ32X30-10
To replace the MALJ32X30-10, order the MBLJ32X30-10. Confirm the 32mm bore, 30mm stroke, 10mm adjust code, G1/8 port, PT thread, and FA/LB mounting (no back cover or SDB). Since this is a no-S SKU, it cannot take a sensor; upgrading to an -S MBLJ moves you from the old CS1-M/DS1-M switches to CMSG/DMSG/EMSG. The adjuster sets end position but does not hold load without air.
Upgrade checklist
- ✓ Order the MBLJ32X30-10 (same bore/stroke/adjust)
- ✓ Same 20–30 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X30-10 instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X30-10 FAQ
Yes, the MALJ32X30-10 is discontinued. The direct replacement is the MBLJ32X30-10, which matches the 32mm bore, 30mm stroke, 10mm adjust code, G1/8 port, and FA/LB mounting. The MBLJ upgrades the construction from threaded covers to a riveted rolling-packed body.
This specific SKU lacks a magnet, so it cannot accept a position sensor; the -S version uses CS1-M/DS1-M switches, while the MBLJ replacement uses CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X30-10 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X30-10 → MBLJ32X30-10)
Tell us the quantity and destination — we quote the direct MBLJ32X30-10 replacement with price, stock and lead time, usually within 7-8 hours.