This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X300-40S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-40-S
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-40-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 40 mm, giving a usable end-position window from 260 to 300 mm. This model is discontinued — the direct replacement is the MBLJ32X300-40-S.
- BoreØ32 mm
- Stroke300 mm
- Adjust window260–300 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X300-40-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-40-S
The AirTAC MALJ32X300-40-S is a discontinued 32mm bore double-acting double-rod cylinder with a 300mm stroke and a 40mm rear travel stop. This yields a usable end-position window of 260-300mm.
The direct replacement is the MBLJ32X300-40-S. It matches the bore, stroke, 40mm adjust code, G1/8 port, and FA/LB mounting. Two upgrade facts: the MALJ uses threaded covers while the MBLJ uses a riveted rolling-packed body, and the MALJ -S magnet works with CS1-M/DS1-M switches while the MBLJ uses CMSG/DMSG/EMSG sensors.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-40-S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-40-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X300-40-S |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Adjustable window | 260 – 300 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X300-40-S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X300-40-S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-40-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×300 | Nominal stroke length in mm. |
| -40 | Adjustable amount: trim the end to a 260–300 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-40-S Is Used
Carton Flap Folder
Fine-tune the 300mm reach on a packaging line flap folder without adding external stops, letting the 346N pull force tuck corrugated flaps smoothly.
Aluminum Profile Saw
Trim the rear 40mm stopper to set the exact cut-off position on an aluminum cutting saw, ensuring the 32mm rod retracts fully without hitting the fixture.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-40-S with MBLJ32X300-40-S
To replace the MALJ32X300-40-S, order the exact direct replacement MBLJ32X300-40-S. Confirm the 32mm bore, 300mm stroke, 40mm adjust code, PT G1/8 port, M10x1.25 rod thread, and FA/LB mounting (no back cover or SDB). The rear adjuster is a travel stop, not a lock; it sets the end position but will not hold a load without live air.
Because the stroke is 300mm, mind rod-to-side-load bending; use a guide rail to prevent rod deflection.
Upgrade checklist
- ✓ Order the MBLJ32X300-40-S (same bore/stroke/adjust)
- ✓ Same 260–300 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X300-40-S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-40-S FAQ
Yes, the MALJ32X300-40-S is discontinued. The direct replacement is the MBLJ32X300-40-S, which matches the 32mm bore, 300mm stroke, 40mm adjust code, G1/8 port, and FA/LB mounting. The MBLJ upgrades the body to a riveted rolling-packed design and changes the magnet switches from CS1-M/DS1-M to CMSG/DMSG/EMSG.
The 40mm adjuster is a rear travel stop, not a lock; it lets you trim the end position to anywhere in the 260-300mm window. It does not hold the load without live air, and the cylinder uses a fixed rubber bumper, not an adjustable air cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X300-40-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-40-S → MBLJ32X300-40-S)
Tell us the quantity and destination — we quote the direct MBLJ32X300-40-S replacement with price, stock and lead time, usually within 7-8 hours.