This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X300-50, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-50
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-50 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 50 mm, giving a usable end-position window from 250 to 300 mm. This model is discontinued — the direct replacement is the MBLJ32X300-50.
- BoreØ32 mm
- Stroke300 mm
- Adjust window250–300 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X300-50
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-50
The AirTAC MALJ32X300-50 is a discontinued 32mm bore, double-acting adjustable-stroke mini cylinder. A rear stopper screw trims up to 50mm of travel, yielding a usable end-position window of 250-300mm. The direct replacement is the MBLJ32X300-50, matching the G1/8 port, M10x1.25 rod thread, and 300mm stroke.
This SKU lacks the -S magnet, so it cannot accept a position sensor. The adjuster is a travel stop, not a lock; it sets the end position but will not hold a load without live air. Impact is absorbed by a fixed rubber bumper, not an adjustable air cushion. The original MALJ uses threaded covers and PT port threads; the MBLJ upgrade features a riveted rolling-packed body. If you previously used a -S variant, note the sensor family changes from CS1-M/DS1-M to CMSG/DMSG/EMSG.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-50 Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-50 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X300-50 |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Adjustable window | 250 – 300 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X300-50 carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X300-50 matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-50
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×300 | Nominal stroke length in mm. |
| -50 | Adjustable amount: trim the end to a 250–300 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-50 Is Used
Long-Stroke Forming Press
Adjust the rear stopper to 275mm to control material compression depth in a press fixture, preventing over-travel on the 300mm stroke.
Carton Flap Folder
Fine-tune the folding arm reach on a packaging line, trimming 20mm off the full extension to accommodate varying box heights without external stops.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-50 with MBLJ32X300-50
To replace the MALJ32X300-50, order the direct replacement MBLJ32X300-50, confirming the 32mm bore, 300mm stroke, 50mm adjust code, G1/8 port, and PT thread. Mounting is FA or LB only (no back-cover or SDB codes apply). Since this is a no-S SKU, it cannot hold a sensor. The adjuster is a stop, not a lock; add an external lock for held loads.
With a 300mm stroke, rod-bending and side-load risks are high; guide the load to prevent rod damage.
Upgrade checklist
- ✓ Order the MBLJ32X300-50 (same bore/stroke/adjust)
- ✓ Same 250–300 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X300-50 instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-50 FAQ
Yes, the MALJ32X300-50 is discontinued. The direct replacement is the MBLJ32X300-50, matching the 32mm bore, 300mm stroke, 50mm adjust code, G1/8 port, and mounting. The MBLJ uses a riveted rolling-packed body instead of threaded covers.
The usable adjustable window is 250-300mm (trimming up to 50mm at the rear). The adjuster is a travel stop, not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X300-50 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X300-50 → MBLJ32X300-50)
Tell us the quantity and destination — we quote the direct MBLJ32X300-50 replacement with price, stock and lead time, usually within 7-8 hours.