This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X35-30, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-30
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-30 is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 30 mm, giving a usable end-position window from 5 to 35 mm. This model is discontinued — the direct replacement is the MBLJ32X35-30.
- BoreØ32 mm
- Stroke35 mm
- Adjust window5–35 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X35-30
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-30
The AirTAC MALJ32X35-30 is a discontinued 32mm bore, double-acting double-rod mini cylinder with a 35mm stroke and a 30mm rear adjustable stop. This gives a usable end-position window of 5-35mm. The direct replacement is the MBLJ32X35-30, matching bore, stroke, force, G1/8 port and mounting.
The rear adjuster is a travel stop, not a lock; it sets the end position but cannot hold a load without live air. This SKU has no magnet (-S) and cannot take a position sensor. The fixed rubber bumper softens end impact but is not an adjustable cushion. Upgrading to the MBLJ brings a riveted rolling-packed body replacing the MALJ threaded covers.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-30 Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-30 |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X35-30 |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Adjustable window | 5 – 35 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X35-30 carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X35-30 matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-30
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×35 | Nominal stroke length in mm. |
| -30 | Adjustable amount: trim the end to a 5–35 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-30 Is Used
Connector Insertion Press
Fine-tune the insertion end position for delicate ribbon-cable connectors, relying on the fixed rubber bumper to soften the final impact.
Label Applicator Tamp
Adjust the rear stop to dial tamp depth for varying product heights on a packaging line, ensuring the 346N pull force retracts the pad cleanly.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-30 with MBLJ32X35-30
Replace the MALJ32X35-30 with the direct replacement MBLJ32X35-30. Confirm the 32mm bore, 35mm stroke, 30mm adjust code, G1/8 port, PT thread, and FA/LB mounting (no back cover or SDB). Since this is a no-S SKU, it cannot take a sensor; the MBLJ upgrade uses CMSG/DMSG/EMSG switches if needed. The adjuster is a stop, not a lock.
Upgrade checklist
- ✓ Order the MBLJ32X35-30 (same bore/stroke/adjust)
- ✓ Same 5–35 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X35-30 instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-30 FAQ
Yes, the MALJ32X35-30 is discontinued. The direct replacement is the MBLJ32X35-30, which matches the 32mm bore, 35mm stroke, 30mm adjust code, G1/8 port, and force ratings.
The 30mm adjust code creates a usable stroke window of 5-35mm. The adjuster is a travel stop, not a lock, and cannot hold a load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X35-30 replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X35-30 → MBLJ32X35-30)
Tell us the quantity and destination — we quote the direct MBLJ32X35-30 replacement with price, stock and lead time, usually within 7-8 hours.