This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X450-30-S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X450-30-S
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X450-30-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 30 mm, giving a usable end-position window from 420 to 450 mm. This model is discontinued — the direct replacement is the MBLJ32X450-30-S.
- BoreØ32 mm
- Stroke450 mm
- Adjust window420–450 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X450-30-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X450-30-S
The AirTAC MALJ32X450-30-S is a discontinued double-acting, double-rod adjustable-stroke mini cylinder. It features a 32 mm bore, a 450 mm stroke, and a 30 mm rear adjuster, providing a usable end-position window of 420-450 mm. The direct replacement is the MBLJ32X450-30-S, matching the bore, stroke, adjust code, and G1/8 port.
This SKU includes a magnet (-S) for position sensing. The older MALJ uses CS1-M or DS1-M switches, while the MBLJ replacement upgrades to CMSG, DMSG, or EMSG sensors. The original MALJ has threaded covers, whereas the MBLJ uses a riveted rolling-packed body. The rear screw is a travel stop that sets the end position; it does not hold a load without live air. End impact is softened by a fixed rubber bumper, not an adjustable air cushion.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X450-30-S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X450-30-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X450-30-S |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Adjustable window | 420 – 450 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X450-30-S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X450-30-S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X450-30-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×450 | Nominal stroke length in mm. |
| -30 | Adjustable amount: trim the end to a 420–450 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X450-30-S Is Used
PCB Edge Router Depth Stop
Dials the 420-450 mm reach on a routing spindle to cut exact panel depths without remounting the cylinder.
Carton Flap Folder
Adjusts the end position by 30 mm to fold varying carton depths accurately on a packaging line.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X450-30-S with MBLJ32X450-30-S
To replace the MALJ32X450-30-S with the MBLJ32X450-30-S, confirm the 32 mm bore, 450 mm stroke, 30 mm adjust code, G1/8 port, and PT thread. Mounting is Basic, FA, or LB only; there is no back cover or SDB option. The -S magnet means you must switch from CS1-M/DS1-M to CMSG/DMSG/EMSG sensors. The adjuster is a travel stop, not a lock, so use an external lock for held loads. At 450 mm, the stroke is under the 500 mm max but requires careful rod alignment to prevent side-load bending.
Upgrade checklist
- ✓ Order the MBLJ32X450-30-S (same bore/stroke/adjust)
- ✓ Same 420–450 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X450-30-S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X450-30-S FAQ
Yes, the MALJ32X450-30-S is discontinued. The direct replacement is the MBLJ32X450-30-S, matching the 32 mm bore, 450 mm stroke, 30 mm adjust code, and G1/8 port. The MBLJ upgrades the threaded covers to a riveted rolling-packed body and changes the magnet sensors from CS1-M/DS1-M to CMSG/DMSG/EMSG.
The 30 mm adjuster is a travel stop that lets you shorten the stroke from 450 mm down to 420 mm. It sets the end position but does not hold the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X450-30-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X450-30-S → MBLJ32X450-30-S)
Tell us the quantity and destination — we quote the direct MBLJ32X450-30-S replacement with price, stock and lead time, usually within 7-8 hours.