This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X500-100-S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X500-100-S
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X500-100-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 100 mm, giving a usable end-position window from 400 to 500 mm. This model is discontinued — the direct replacement is the MBLJ32X500-100-S.
- BoreØ32 mm
- Stroke500 mm
- Adjust window400–500 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X500-100-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X500-100-S
The AirTAC MALJ32X500-100-S is a discontinued double-acting double-rod cylinder with a 32 mm bore and a 500 mm stroke. It provides a usable adjustable end-position window of 400-500 mm via a 100 mm rear travel stop. The direct replacement is the MBLJ32X500-100-S.
The rear adjuster sets reach without external stops, but it is a travel stop, not a lock, and cannot hold a load without live air. This -S SKU uses older CS1-M / DS1-M sensors, while the MBLJ upgrade uses CMSG / DMSG / EMSG switches and a riveted rolling-packed body instead of the original threaded covers. Impact is absorbed by a fixed rubber bumper, not an adjustable air cushion.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X500-100-S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X500-100-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X500-100-S |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Adjustable window | 400 – 500 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X500-100-S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X500-100-S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X500-100-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×500 | Nominal stroke length in mm. |
| -100 | Adjustable amount: trim the end to a 400–500 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X500-100-S Is Used
Long-Stroke Pallet Push-Off
Fine-tunes the end position on a 500 mm conveyor transfer stroke, letting the 346 N pull retract the rod precisely to clear passing pallets.
Automated Door Opening
Sets a precise 450 mm open stop for industrial machine access doors, preventing the piston from slamming its full travel against the rubber bumper.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X500-100-S with MBLJ32X500-100-S
To replace this MALJ32X500-100-S, order the MBLJ32X500-100-S. Confirm the 32 mm bore, 500 mm stroke, 100 mm adjust code, G1/8 port, and PT thread. Mounting is Basic, FA, or LB only; there is no back cover or SDB option. Because the stroke is 500 mm, minimize side-load to prevent rod bending.
Upgrade checklist
- ✓ Order the MBLJ32X500-100-S (same bore/stroke/adjust)
- ✓ Same 400–500 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X500-100-S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X500-100-S FAQ
Yes, the MALJ32X500-100-S is discontinued. The direct replacement is the MBLJ32X500-100-S, which matches the 32 mm bore, 500 mm stroke, 100 mm adjust code, G1/8 port, and force. You must swap your CS1-M / DS1-M sensors for the MBLJ's CMSG / DMSG / EMSG switches.
The 100 mm rear adjuster creates a usable stroke window of 400-500 mm. The adjuster is a travel stop, not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X500-100-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X500-100-S → MBLJ32X500-100-S)
Tell us the quantity and destination — we quote the direct MBLJ32X500-100-S replacement with price, stock and lead time, usually within 7-8 hours.