This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X60-50S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-50S
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-50S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 50 mm, giving a usable end-position window from 10 to 60 mm. This model is discontinued — the direct replacement is the MBLJ32X60-50S.
- BoreØ32 mm
- Stroke60 mm
- Adjust window10–60 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X60-50S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-50S
The AirTAC MALJ32X60-50S is a discontinued 32mm bore, double-acting adjustable-stroke mini cylinder. It provides a usable stroke window of 10-60mm via a 50mm rear travel stop. The direct replacement is the MBLJ32X60-50S.
This -S magnet model uses older CS1-M/DS1-M switches, while the MBLJ replacement uses CMSG/DMSG/EMSG sensors. The adjuster sets end position but does not hold load without air. MALJ features threaded covers, whereas the MBLJ uses a riveted rolling-packed body. Both use a fixed rubber bumper, not an adjustable cushion.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-50S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-50S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X60-50S |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Adjustable window | 10 – 60 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X60-50S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X60-50S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-50S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×60 | Nominal stroke length in mm. |
| -50 | Adjustable amount: trim the end to a 10–60 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-50S Is Used
Connector Insertion Press
Fine-tune the end position without adding external stops when seating ribbon-cable connectors, preventing housing damage via the fixed rubber bumper.
Tube Bender Stop
Adjust the rear stopper to control the return depth on copper tube benders, ensuring consistent bend angles without repositioning the cylinder.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-50S with MBLJ32X60-50S
To replace the MALJ32X60-50S, install the direct replacement MBLJ32X60-50S. Confirm the 32mm bore, 60mm stroke, 50mm adjust code, G1/8 port, and FA/LB mounting. The -S magnet switches must change from CS1-M/DS1-M to CMSG/DMSG/EMSG. The adjuster is a travel stop, not a lock.
Upgrade checklist
- ✓ Order the MBLJ32X60-50S (same bore/stroke/adjust)
- ✓ Same 10–60 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X60-50S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-50S FAQ
Yes, the MALJ32X60-50S is discontinued. The direct replacement is the MBLJ32X60-50S, which matches the 32mm bore, 60mm stroke, 50mm adjust code, and G1/8 port. You must update your -S magnet sensors from CS1-M/DS1-M to CMSG/DMSG/EMSG.
The 50mm rear adjuster creates a usable stroke window from 10mm to 60mm. The adjuster is a travel stop, not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X60-50S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X60-50S → MBLJ32X60-50S)
Tell us the quantity and destination — we quote the direct MBLJ32X60-50S replacement with price, stock and lead time, usually within 7-8 hours.