This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X65-10S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X65-10S
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X65-10S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 10 mm, giving a usable end-position window from 55 to 65 mm. This model is discontinued — the direct replacement is the MBLJ32X65-10S.
- BoreØ32 mm
- Stroke65 mm
- Adjust window55–65 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X65-10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X65-10S
The AirTAC MALJ32X65-10S is a discontinued 32mm bore, double-acting double-rod cylinder with a 65mm stroke and a 10mm rear adjustable stopper, yielding a usable travel window of 55-65mm. The direct replacement is the MBLJ32X65-10S, which matches the bore, stroke, adjuster code, port, and mounting.
This mini cylinder uses a fixed rubber bumper, not an adjustable air cushion. The rear adjuster is a travel stop that sets the end position but does not hold a load without live air pressure. For sensor feedback, this -S SKU uses older CS1-M / DS1-M switches, whereas the riveted rolling-packed MBLJ replacement uses CMSG / DMSG / EMSG switches. The original MALJ features threaded covers, a 20um hard chrome carbon-steel rod, and a heterogeneous grease-retaining seal.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X65-10S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X65-10S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X65-10S |
| Bore size | Ø32 mm |
| Stroke | 65 mm |
| Adjustable window | 55 – 65 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X65-10S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X65-10S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X65-10S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×65 | Nominal stroke length in mm. |
| -10 | Adjustable amount: trim the end to a 55–65 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X65-10S Is Used
Connector Insertion Tweak
Setting a 55mm end position allows precise insertion of delicate fiber-optic connectors into housings without bottoming out, using the 346N pull force to retract safely.
Vacuum Cup Pick-and-Place
Adjusting the rear stopper on this 32mm cylinder lets a vacuum cup descend exactly 60mm to grip flat glass panels, avoiding crash damage without adding external physical stops.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X65-10S with MBLJ32X65-10S
To replace the MALJ32X65-10S, order the exact direct replacement MBLJ32X65-10S. Confirm the 32mm bore, 65mm stroke, 10mm adjust code, G1/8 port, and M10x1.25 rod-end thread. Mounting is Basic, FA, or LB only; there is no back-cover or SDB option. The -S magnet means you must switch your CS1-M / DS1-M sensors to the CMSG / DMSG / EMSG family for the MBLJ. Remember the rear adjuster is a stop, not a lock; it cannot hold a load without air.
At 65mm, this stroke is well within standard limits, so rod-bending side-load risks are minimal compared to longer 300mm+ strokes.
Upgrade checklist
- ✓ Order the MBLJ32X65-10S (same bore/stroke/adjust)
- ✓ Same 55–65 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X65-10S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X65-10S FAQ
Yes, the MALJ32X65-10S is discontinued. The direct replacement is the MBLJ32X65-10S. It matches the 32mm bore, 65mm stroke, 10mm adjuster, G1/8 port, and force. You must upgrade your sensors from the old CS1-M / DS1-M switches to the MBLJ's CMSG / DMSG / EMSG family.
The -10 adjust code lets you trim up to 10mm at the rear, creating a usable stroke window of 55-65mm. The adjuster is a travel stop, not a lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X65-10S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X65-10S → MBLJ32X65-10S)
Tell us the quantity and destination — we quote the direct MBLJ32X65-10S replacement with price, stock and lead time, usually within 7-8 hours.