This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X75-75S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X75-75-S
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X75-75-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 75 mm, giving a usable end-position window from 0 to 75 mm. This model is discontinued — the direct replacement is the MBLJ32X75-75-S.
- BoreØ32 mm
- Stroke75 mm
- Adjust window0–75 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X75-75-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X75-75-S
The AirTAC MALJ32X75-75-S is a discontinued double-acting, double-rod mini cylinder with a 75 mm rear adjustable stroke stopper. It provides a usable end-position window of 0-75 mm, letting you dial in the exact reach without adding external stops. The direct replacement is the MBLJ32X75-75-S, which matches the bore, stroke, adjuster, G1/8 port, and mounting.
This SKU includes the -S magnet, which uses the older CS1-M / DS1-M switches; the MBLJ replacement upgrades to CMSG / DMSG / EMSG sensors. The MALJ uses threaded covers, whereas the MBLJ features a riveted rolling-packed body. End impact is softened by a fixed rubber bumper, as there is no air cushion. Remember that the adjuster sets the travel stop but does not hold a load without live air pressure.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X75-75-S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X75-75-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X75-75-S |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Adjustable window | 0 – 75 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X75-75-S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X75-75-S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X75-75-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×75 | Nominal stroke length in mm. |
| -75 | Adjustable amount: trim the end to a 0–75 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X75-75-S Is Used
Packaging Fold Flap
Adjust the end position on the fly for various carton sizes, using the 346 N pull force to tuck glue tabs without crushing the cardboard fiberboard.
Textile Guide Tensioner
Fine-tune the yarn guide arm reach in a weaving loom, moving the stopper to 40 mm to maintain precise fabric tension without swapping out the entire cylinder body.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X75-75-S with MBLJ32X75-75-S
To replace this MALJ32X75-75-S, order the exact direct replacement MBLJ32X75-75-S. Confirm the 32 mm bore, 75 mm stroke, 75 mm adjust code, PT G1/8 port, M10x1.25 rod-end thread, and FA/LB mounting. The -S magnet means a sensor family change from CS1-M / DS1-M to CMSG / DMSG / EMSG. The rear adjuster is a travel stop, not a lock; use an external lock for held loads.
Upgrade checklist
- ✓ Order the MBLJ32X75-75-S (same bore/stroke/adjust)
- ✓ Same 0–75 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X75-75-S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X75-75-S FAQ
Yes, the MALJ32X75-75-S is discontinued. The direct replacement is the MBLJ32X75-75-S, which matches the 32 mm bore, 75 mm stroke, 75 mm adjust code, G1/8 port, and FA/LB mounting. The MBLJ upgrades the body to a riveted rolling-packed design and changes the -S magnet switches from CS1-M / DS1-M to CMSG / DMSG / EMSG.
The 75 mm adjust code lets you trim the rear travel stopper by up to 75 mm, creating a usable end-position window of 0-75 mm. The adjuster is a travel stop, not a lock, and will not hold a load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X75-75-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X75-75-S → MBLJ32X75-75-S)
Tell us the quantity and destination — we quote the direct MBLJ32X75-75-S replacement with price, stock and lead time, usually within 7-8 hours.