This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X80-40S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-40-S
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-40-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 40 mm, giving a usable end-position window from 40 to 80 mm. This model is discontinued — the direct replacement is the MBLJ32X80-40-S.
- BoreØ32 mm
- Stroke80 mm
- Adjust window40–80 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X80-40-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-40-S
The AirTAC MALJ32X80-40-S is a discontinued double-acting double-rod mini cylinder with a rear adjustable stroke stopper. The 40 mm adjuster trims the 80 mm stroke, giving a usable 40-80 mm end-position window. The direct replacement is the MBLJ32X80-40-S, matching the 32 mm bore, port, and mounting.
This SKU includes a magnet (-S) for the older CS1-M / DS1-M switches, whereas the MBLJ replacement uses CMSG / DMSG / EMSG sensors. The MALJ uses threaded covers, while the MBLJ features a riveted rolling-packed body. The adjuster sets travel limits but does not hold load without live air, and a fixed rubber bumper softens end impact without acting as an adjustable cushion.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-40-S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-40-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X80-40-S |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Adjustable window | 40 – 80 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X80-40-S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X80-40-S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-40-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×80 | Nominal stroke length in mm. |
| -40 | Adjustable amount: trim the end to a 40–80 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-40-S Is Used
PCB Router Z-Axis Stop
Dial the 40-80 mm window to set router depth on printed circuit boards.
Wire Harness Forming
Bend copper wire harnesses to exact lengths. The rear stopper dials the forming plate reach without adding external collars to the 12 mm rod.
Small Parts Ejector
Eject molded plastic parts from a die. Adjust the 80 mm stroke down to 40 mm to match varying mold depths without re-plumbing the G1/8 port.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-40-S with MBLJ32X80-40-S
To replace the MALJ32X80-40-S, order the direct replacement MBLJ32X80-40-S. Confirm the 32 mm bore, 80 mm stroke, 40 mm adjust code, G1/8 PT port, M10x1.25 rod thread, and FA/LB mounting (no back cover or SDB). The -S magnet switches from CS1-M / DS1-M to CMSG / DMSG / EMSG. Remember the adjuster is a travel stop, not a lock.
Upgrade checklist
- ✓ Order the MBLJ32X80-40-S (same bore/stroke/adjust)
- ✓ Same 40–80 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X80-40-S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-40-S FAQ
Yes, the MALJ32X80-40-S is discontinued. The direct replacement is the MBLJ32X80-40-S, which matches the 32 mm bore, 80 mm stroke, 40 mm adjust code, G1/8 port, and mounting. You only change the model from MALJ to MBLJ.
The 40 mm adjust code lets you trim the 80 mm stroke, giving a usable 40-80 mm window. At 0.7 MPa it pushes 563 N, and the maximum force is 82 kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X80-40-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X80-40-S → MBLJ32X80-40-S)
Tell us the quantity and destination — we quote the direct MBLJ32X80-40-S replacement with price, stock and lead time, usually within 7-8 hours.