This model is discontinued
AirTAC has phased out the MALJ series. You can still order this code here: we ship the direct replacement MBLJ32X85-10-S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLJ replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X85-10-S
The AirTAC Airtac MALJ32 Adjustable Mini Cylinder MALJ32X85-10-S is a double-acting aluminum mini cylinder with a rear adjustable-stroke stopper: you can trim up to 10 mm, giving a usable end-position window from 75 to 85 mm. This model is discontinued — the direct replacement is the MBLJ32X85-10-S.
- BoreØ32 mm
- Stroke85 mm
- Adjust window75–85 mm
- Port sizeG1/8
- Rod threadM10×1.25
- StatusDiscontinued → MBLJ32X85-10-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X85-10-S
The AirTAC MALJ32X85-10-S is a discontinued double-acting mini cylinder with a rear adjustable stroke stopper. It provides a usable extension window of 75-85 mm, letting you dial in the exact reach without external spacers. The direct replacement is the MBLJ32X85-10-S, matching the bore, stroke, port, and force.
This -S SKU includes a magnet for position sensing. The legacy MALJ uses CS1-M or DS1-M switches, while the MBLJ upgrade moves to CMSG, DMSG, or EMSG sensors. The original MALJ features threaded covers and a fixed rubber bumper; the MBLJ replacement uses a riveted rolling-packed body. The rear adjuster sets the end position but does not hold the load without live air pressure.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X85-10-S Technical Specifications
| Model | Airtac MALJ32 Adjustable Mini Cylinder MALJ32X85-10-S |
|---|---|
| Series | MALJ adjustable-stroke mini cylinder (discontinued) |
| Replacement | MBLJ32X85-10-S |
| Bore size | Ø32 mm |
| Stroke | 85 mm |
| Adjustable window | 75 – 85 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
The rear adjuster is a travel stop, not a lock — it sets the end position but does not hold the load without live air. No back-cover code and no SDB on adjustable-stroke. The MBLJ32X85-10-S carries the same ratings.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
MALJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod MAL push of the same bore. The MBLJ32X85-10-S matches these values.
Model Code: Airtac MALJ32 Adjustable Mini Cylinder MALJ32X85-10-S
| MALJ | Adjustable-stroke aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×85 | Nominal stroke length in mm. |
| -10 | Adjustable amount: trim the end to a 75–85 mm window. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLJ uses CMSG/DMSG/EMSG). |
Replacement: MALJ → MBLJ. No back-cover (CA/U/CM) and no SDB. Mounting: FA / LB.
Where the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X85-10-S Is Used
Bottle Capper Height Set
Fine-tune the 10 mm stroke window on a packaging line capper to compensate for varying cap heights, ensuring consistent torque application without rebuilding the head.
Small Parts Ejector
Adjust the end position to eject small aluminum parts from a CNC lathe, preventing the rod from over-traveling into the chuck while delivering 346 N pull.
Replacing the Airtac MALJ32 Adjustable Mini Cylinder MALJ32X85-10-S with MBLJ32X85-10-S
To replace this MALJ32X85-10-S, order the exact direct replacement MBLJ32X85-10-S. Confirm the 32 mm bore, 85 mm stroke, 10 mm adjuster code, G1/8 port, and FA or LB mounting (no back cover or SDB). The -S magnet means your CS1-M/DS1-M sensors must change to CMSG/DMSG/EMSG on the new cylinder. The adjuster is a travel stop, not a lock.
At 85 mm stroke, keep the rod side-load minimal to prevent bending.
Upgrade checklist
- ✓ Order the MBLJ32X85-10-S (same bore/stroke/adjust)
- ✓ Same 75–85 mm adjustable window
- ✓ Adjuster is a stop, not a lock
- ✓ No back cover / SDB — plan an FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check The rear adjuster sets the end position — it is not a load lock.
- check No back-cover / SDB on adjustable-stroke — use FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLJ32X85-10-S instead of this discontinued model.
Airtac MALJ32 Adjustable Mini Cylinder MALJ32X85-10-S FAQ
Yes, the MALJ32X85-10-S is discontinued. You will need CMSG/DMSG/EMSG sensors for the new MBLJ magnet.
The 10 mm adjuster creates a usable stroke window of 75-85 mm. The adjuster is a travel stop, not a lock, and the fixed rubber bumper softens the end impact.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLJ32X85-10-S replaces this model 1:1.
Fast Dispatch
MBLJ replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLJ Replacements
Request a Quote (Airtac MALJ32 Adjustable Mini Cylinder MALJ32X85-10-S → MBLJ32X85-10-S)
Tell us the quantity and destination — we quote the direct MBLJ32X85-10-S replacement with price, stock and lead time, usually within 7-8 hours.