Airtac MPGH Hinge Mount Type Cylinder MPGH6X10
Genuine AirTAC hinge mount cylinder, order code MPGH6X10 from the MPGH6 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Stroke10 mm
- MagnetNo magnet
- Rod end and mountingMale thread
- ActionDouble acting
- Bore / rodØ6 / Ø3 mm
- Standard strokes5 mm steps to 25 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MPGH Hinge Mount Type Cylinder MPGH6X10
The AirTAC MPGH6X10 is the 10 mm stroke version of the MPG hinge mount series with a Ø6 mm bore and Ø3 mm rod. Its rear clevis lets the cylinder pivot with the load, and the male thread rod end accepts I joints, Y joints and bumper caps, so force from 14.2 N push and 10.6 N pull at 0.5 MPa can be delivered through the accessory that suits the fixture.
This code ships without a magnet, although the body carries sensor grooves all round for later retrofit thinking; if a position sensor is needed now, the S variant is the matching choice. Air is filtered by a 40 um element, pressure runs 0.15-0.7 MPa, and bumpers cushion both stroke ends.
Airtac MPGH Hinge Mount Type Cylinder MPGH6X10 Technical Specifications
| Order code | MPGH6X10 |
|---|---|
| Product | Hinge Mount Cylinder |
| Stroke | 10 mm |
| Magnet | No magnet |
| Rod end and mounting | Male thread |
| Action | Double acting |
|---|---|
| Bore / rod | Ø6 / Ø3 mm |
| Standard strokes | 5 mm steps to 25 mm |
| Force at 0.5 MPa | Push 14.2 N · pull 10.6 N |
| Port | M3×0.5 |
| Mounting | Rear clevis (hinge) |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-0.7 MPa (22-100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Piston speed | 30-500 mm/s |
| Cushion | Bumper |
Source: AirTAC Products Catalog 2026A (PDF01-P0508..P0509), MPG series theoretical force, specifications, strokes and ordering code.
How to choose
Within the MPG hinge ordering code, the 10 mm figure fixes the stroke, so MPGH6X10 sits between MPGH6X5 and MPGH6X15 in the 5 mm step range that ends at 25 mm. Pick this code over MPGH6X10N if your tooling screws directly onto a male thread rod; pick MPGH6X10S instead when a magnet for position sensing is required. Add SDB to order the rear clevis bracket, since leaving that field blank means no accessory is supplied.
Applications
Light clamping fixtures
The rear clevis pivots as the fixture tilts, while the male thread rod takes an I or Y joint to press small parts with 14.2 N at 0.5 MPa.
Fine alignment of small parts
A 10 mm stroke on a Ø6 mm bore gives short, precise nudges at 30-500 mm/s for nudging components into position on miniature assemblies.
Compact machine attachments
The M3x0.5 ports and small, light body fit dense layouts; order the SDB bracket when the hinge mount needs a supplied clevis.
FAQ
What are the key figures of the AirTAC MPGH6X10?
Double acting, Ø6 mm bore and Ø3 mm rod, 10 mm stroke (tolerance +1.0/0 mm), male thread rod end, M3x0.5 ports, 0.15-0.7 MPa (22-100 psi) operating pressure, 14.2 N push and 10.6 N pull at 0.5 MPa, 30-500 mm/s speed, bumper cushion, -20 to +70 C.
Can I add position sensing or a rod accessory later on this code?
MPGH6X10 has no magnet, so position switches cannot be read as delivered; the body does have sensor grooves all round. The male thread rod accepts AirTAC I joints, Y joints and bumper caps, and the SDB rear clevis bracket can be ordered as the mounting accessory.