Airtac MPGH Hinge Mount Type Cylinder MPGH6X25
Genuine AirTAC hinge mount cylinder, order code MPGH6X25 from the MPGH6 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Stroke25 mm
- MagnetNo magnet
- Rod end and mountingMale thread
- ActionDouble acting
- Bore / rodØ6 / Ø3 mm
- Standard strokes5 mm steps to 25 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MPGH Hinge Mount Type Cylinder MPGH6X25
The AirTAC MPGH6X25 is the longest-stroke version of the MPG hinge mount cylinder range: 25 mm of travel on a Dia 6 mm bore, double acting, mounted by a rear clevis so the body pivots with the load. At 0.5 MPa it develops 14.2 N push and 10.6 N pull, enough for light clamping and positioning of small parts where a larger cylinder would waste space.
This code has a male threaded rod end and no magnet. The thread accepts the range of rod-end accessories named in the catalog, including I and Y joints and bumper caps, while bumper cushions soften both ends of travel and the rod guide needs no extra lubrication. Position sensing is possible on MPGH6 cylinders through the sensor grooves around the body, but detection on this specific code requires choosing the magnet-equipped sibling instead.
Airtac MPGH Hinge Mount Type Cylinder MPGH6X25 Technical Specifications
| Order code | MPGH6X25 |
|---|---|
| Product | Hinge Mount Cylinder |
| Stroke | 25 mm |
| Magnet | No magnet |
| Rod end and mounting | Male thread |
| Action | Double acting |
|---|---|
| Bore / rod | Ø6 / Ø3 mm |
| Standard strokes | 5 mm steps to 25 mm |
| Force at 0.5 MPa | Push 14.2 N · pull 10.6 N |
| Port | M3×0.5 |
| Mounting | Rear clevis (hinge) |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-0.7 MPa (22-100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Piston speed | 30-500 mm/s |
| Cushion | Bumper |
Source: AirTAC Products Catalog 2026A (PDF01-P0508..P0509), MPG series theoretical force, specifications, strokes and ordering code.
How to choose
Pick MPGH6X25 when you need the full 25 mm stroke; shorter siblings MPGH6X5 to MPGH6X20 cover 5 to 20 mm in 5 mm steps if travel can be reduced, and every stroke on the Dia 6 bore carries a +1.0/0 mm tolerance. Choose MPGH6X25S if your machine must confirm position, because only that code includes the magnet. Choose MPGH6X25N if you want a plain rod without a thread. For pivot mounting, add the SDB rear clevis bracket as the accessory code.
Applications
Small fixture positioning
The 25 mm stroke, the longest in the MPGH6 range, lets a Dia 6 mm bore push light workpieces into a nest or against a stop on compact automation fixtures.
Pivoting lever linkages
Rear clevis mounting lets the cylinder swing as a lever or latch arm rotates; the SDB rear clevis bracket provides the hinge point the mounting needs.
Threaded rod-end tooling
The male thread rod accepts I joints, Y joints and bumper caps from the catalog accessory list, so custom tips can be fitted without machining the rod.
FAQ
What are the key figures of the AirTAC MPGH6X25?
Dia 6 mm bore with Dia 3 mm rod, 25 mm stroke in the 5 to 25 mm range (tolerance +1.0/0 mm), double acting, push 14.2 N and pull 10.6 N at 0.5 MPa, M3x0.5 port, operating pressure 0.15-0.7 MPa (22-100 psi), proof pressure 1.2 MPa, temperature -20 to +70 C, piston speed 30-500 mm/s, bumper cushion, air filtered by a 40 um element.
Can I add position sensing or a bracket to MPGH6X25?
The body carries sensor grooves all round, but this code has no magnet, so position switches will not detect it; the magnet is only on MPGH6X25S. For mounting, the SDB rear clevis bracket is the catalog accessory for the rear hinge, and I or Y joints plus bumper caps fit the male threaded rod end.