This model is discontinued
AirTAC has phased out the MSAL series. You can still order this code here: we ship the direct replacement MSBL40X50SCA, with the same bore, stroke, output force, port and mounting, so it fits the same application. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MSAL Front Single Acting Compact Cylinder MSAL40X50SCA
The AirTAC Airtac MSAL Front Single Acting Compact Cylinder MSAL40X50SCA is a single acting, push (spring return) aluminum-barrel mini cylinder with a Ø40mm bore and 50mm stroke, G1/4 ports and a fixed rubber bumper. Air drives the push (work) stroke and the spring returns the rod — it rests retracted on air loss. This model is discontinued; the direct replacement is the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X50SCA.
- BoreØ40 mm
- Stroke50 mm
- Port sizeG1/4
- Acting typeSingle acting, push (spring return)
- Rod threadM12×1.25
- StatusDiscontinued → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X50SCA
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MSAL Front Single Acting Compact Cylinder MSAL40X50SCA
The AirTAC MSAL40X50SCA is a discontinued single-acting push, spring-return mini cylinder. Air extends the 16mm rod for the 50mm work stroke, while an internal spring retracts it to a fail-safe home when air is removed. It delivers a usable push force of 539.9 N at 0.5 MPa and 791.1 N at 0.7 MPa. The direct replacement is the MSBL40X50SCA, matching the 40mm bore, G1/4 port, and CA pivot back cover.
This SKU includes the -S magnet, which works with older CS1-M / DS1-M switches; the MSBL replacement uses CMSG / DMSG / EMSG sensors. The MSAL uses threaded covers, whereas the MSBL features a riveted rolling-packed body. End-of-stroke damping relies on a fixed rubber bumper, not an adjustable cushion. Never apply an external load on the spring return stroke, as the spring only provides a small retraction force.
Airtac MSAL Front Single Acting Compact Cylinder MSAL40X50SCA Technical Specifications
| Model | Airtac MSAL Front Single Acting Compact Cylinder MSAL40X50SCA |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X50SCA |
| Bore size | Ø40 mm |
| Stroke | 50 mm |
| Acting type | Single acting, push (spring return) |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 150 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X50SCA carries the same single-acting ratings.
Usable Push Force (Ø40mm)
| Pressure | Push force (net of spring) |
|---|---|
| 0.5 MPa | 539.9 N |
| 0.7 MPa | 791.1 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MSAL Front Single Acting Compact Cylinder MSAL40X50SCA
| MSAL | Single acting, push (spring return) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×50 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MSBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MSAL → MSBL. Related: MTAL/MTBL (single-acting pull), MAL/MBL (double acting).
Where the Airtac MSAL Front Single Acting Compact Cylinder MSAL40X50SCA Is Used
Stamping Press Ejector
Ejects small stamped metal parts from a die using 539.9 N of push force at 0.5 MPa, relying on the spring return to safely retract the 16mm rod when air pressure drops.
Pivoting Diverter Gate
Swings a material flow flap on a packaging line using the CA pivot back cover, using the fail-safe spring return to pull the gate closed during an air loss emergency.
Woodworking Clamp Arm
Holds a wooden workpiece against a routing table with 791.1 N at 0.7 MPa, releasing instantly when the 3/2 valve vents air, allowing the fixed rubber bumper to absorb the stop impact.
Replacing the Airtac MSAL Front Single Acting Compact Cylinder MSAL40X50SCA with AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X50SCA
Replace the MSAL40X50SCA with the MSBL40X50SCA. Confirm the 40mm bore, 50mm stroke, PT G1/4 port, M12x1.25 rod thread, and CA pivot back cover. The -S magnet requires changing your CS1-M / DS1-M switches to the CMSG / DMSG / EMSG family. Maintain the 0.2 MPa minimum working pressure so air can overcome the return spring.
For sizing both ways: step down to the 32mm bore for lighter loads (317.7 N push at 0.5 MPa), or step up if you need more force (40mm is the largest MSAL size, offering 791.1 N at 0.7 MPa). With a 50mm stroke on this compact body, keep the load guided to prevent rod-bending side loads.
Upgrade checklist
- ✓ Order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X50SCA (same bore/stroke/force)
- ✓ Same push direction and retracted fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X50SCA instead of this discontinued model.
Airtac MSAL Front Single Acting Compact Cylinder MSAL40X50SCA FAQ
Yes, the MSAL40X50SCA is discontinued. The direct replacement is the MSBL40X50SCA, matching the 40mm bore, 50mm stroke, CA pivot, and G1/4 port. You must upgrade your CS1-M / DS1-M sensors to the CMSG / DMSG / EMSG family for the new riveted body.
The usable push force (net of the return spring) is 163.1 N at 0.2 MPa, 539.9 N at 0.5 MPa, and 791.1 N at 0.7 MPa. The minimum operating pressure is 0.2 MPa because the incoming air must overcome the internal return spring to extend the rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X50SCA replaces this model 1:1.
Fast Dispatch
MSBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MSBL Replacements
Request a Quote (Airtac MSAL Front Single Acting Compact Cylinder MSAL40X50SCA → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X50SCA)
Tell us the quantity and destination — we quote the direct AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X50SCA replacement with price, stock and lead time, usually within 7-8 hours.