This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60CM — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60CM in place of this model. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60CM
The AirTAC Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60CM is a single acting, push (spring return) aluminum-barrel mini cylinder with a Ø40mm bore and 60mm stroke, G1/4 ports and a fixed rubber bumper. Air drives the push (work) stroke and the spring returns the rod — it rests retracted on air loss. This model is discontinued; the drop-in replacement is the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60CM.
- BoreØ40 mm
- Stroke60 mm
- Port sizeG1/4
- Acting typeSingle acting, push (spring return)
- Rod threadM12×1.25
- StatusDiscontinued → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60CM
About the Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60CM
The AirTAC MSAL40X60CM is a discontinued single-acting push, spring-return mini cylinder. Air extends the 16mm rod for the 60mm work stroke, and an internal spring retracts it to a fail-safe home when air is released. This 40mm bore delivers a usable push force of 539.9 N at 0.5 MPa and 791.1 N at 0.7 MPa. The exact drop-in replacement is the MSBL40X60CM, matching the bore, stroke, CM round-end back cover, and G1/4 port.
This SKU lacks the -S magnet and cannot accept a position sensor. The original MSAL uses threaded covers and PT port threads, whereas the current MSBL replacement features a riveted rolling-packed body. End-of-stroke damping is handled by a fixed rubber bumper, as single-acting models do not use adjustable cushions. Apply no external load on the spring return stroke to avoid damaging the internal mechanism.
Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60CM Technical Specifications
| Model | Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60CM |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60CM |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Single acting, push (spring return) |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 150 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60CM carries the same single-acting ratings.
Usable Push Force (Ø40mm)
| Pressure | Push force (net of spring) |
|---|---|
| 0.5 MPa | 539.9 N |
| 0.7 MPa | 791.1 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60CM
| MSAL | Single acting, push (spring return) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 40 | Bore size in mm (20/25/32/40). |
| ×60 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MSBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MSAL → MSBL. Related: MTAL/MTBL (single-acting pull), MAL/MBL (double acting).
Where the Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60CM Is Used
Stamping Press Ejector
Ejects small stamped metal parts from a die using 539.9 N of push force at 0.5 MPa, relying on the spring return to safely retract the 16mm rod when air pressure is cut.
Woodworking Clamp
Applies 791.1 N of holding force at 0.7 MPa to secure wooden workpieces against a router fence, with the fail-safe retracted home preventing workpiece damage on air loss.
Packaging Gate Diverter
Pushes a mechanical diverter gate to route cartons on a conveyor line, using the single-acting push design to simplify piping with one 3/2 valve instead of a 5/2.
Replacing the Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60CM with AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60CM
To replace the MSAL40X60CM, specify the MSBL40X60CM to retain the 40mm bore, 60mm stroke, G1/4 port, and CM round-end back cover. Because this is a no-magnet SKU, you lose position sensing entirely; if you need end-of-stroke signals, the MSBL upgrade requires CMSG, DMSG, or EMSG switches, which changes your wiring. Confirm the 0.2 MPa minimum operating pressure is met, as air must overcome the return spring. Never apply external load on the return stroke.
For sizing alternatives, stepping down to the 32mm bore drops the 0.5 MPa push force to 317.7 N, which may be insufficient for heavier ejection. Stepping up is not possible as 40mm is the largest MSAL bore, so if 539.9 N is not enough, you must migrate to a larger double-acting series. The 60mm stroke is well within standard limits, but always verify side-load conditions to prevent rod bending.
Upgrade checklist
- ✓ Order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60CM (same bore/stroke/force)
- ✓ Same push direction and retracted fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60CM instead of this discontinued model.
Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60CM FAQ
Yes, the MSAL40X60CM is discontinued. The exact drop-in replacement is the AirTAC MSBL40X60CM. It matches the 40mm bore, 60mm stroke, CM round-end back cover, G1/4 port, and single-acting push function. The MSBL upgrades the body to a riveted rolling-packed design but retains the same force class.
The usable push force (net of the return spring) is 539.9 N at 0.5 MPa and 791.1 N at 0.7 MPa. The maximum push force is approximately 80.7 kgf at 0.7 MPa. The minimum operating pressure is 0.2 MPa, as the compressed air must overcome the internal return spring to extend the rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Drop-in Upgrade
The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60CM replaces this model 1:1.
Fast Dispatch
MSBL replacements usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MSBL Replacements
Request a Quote (Airtac MSAL Front Single Acting Compact Cylinder MSAL40X60CM → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60CM)
Tell us the quantity and destination — we quote the drop-in AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL40X60CM replacement with price, stock and lead time, usually within 7-8 hours.