Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X55-10
The AirTAC Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X55-10 is a double-acting, double-rod pen-size mini cylinder whose rear rod carries a stroke adjuster. On a Ø16mm bore it gives a nominal 55mm stroke with a 10mm fine-adjustable window — settable from 45 to 55mm, so you set the end position without changing hardware.
- BoreØ16 mm
- Nominal stroke55 mm
- Adjust window10 mm
- Effective range45–55 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X55-10
The AirTAC PBJ16X55-10 is a double-acting, double-rod pen-size mini cylinder with a 10mm adjustable window. A rear M5x0.8 adjuster screw and lock nut shorten the retract end, giving an effective stroke range of 45-55mm. You set the exact return length right on the machine during commissioning. The extend end remains fixed.
The slim SUS304 stainless body saves space in tight jigs. It uses an M5x0.8 air port, a fixed TPU bumper at each end, and a Ø5mm rod.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X55-10 Technical Specifications
| Model | Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X55-10 |
|---|---|
| Series | PBJ JIS pen-size adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Rod diameter | Ø5 mm |
| Nominal stroke | 55 mm |
| Adjustable window | 10 mm (45–55 mm) |
| Adjuster thread | M5×0.8 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
PBJ is a double-rod cylinder: the rear rod carries the stroke adjuster, which sets the stroke end within the adjustable window. Confirm the set position against the product label before installation.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 90.7 N | 90.7 N |
| 0.7 MPa (max) | 126.9 N | 126.9 N |
The rear rod passes through the rear cover, so both piston faces lose rod area: push is shown at the annular-area value (conservative), lower than a single-rod PB push of the same bore. Size with a friction margin.
Model Code: Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X55-10
| PBJ | JIS pen-size adjustable-stroke mini-cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×55 | Nominal stroke length in mm. |
| -10 | Adjustable-stroke window in mm (10/20/30/40/50/75/100). |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (fixed stroke), PBD (double rod), PBR (front-mount).
Where the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X55-10 Is Used
Trial Insertion Stops
Dial in the exact 45-55mm return depth for a press-fit operation without swapping hardware during prototype runs.
Changeover Fixtures
Quickly reset the retract length on a multi-product line to accommodate different part heights and reduce tooling downtime.
Variable Depth Stops
Set precise back positions for light-end-of-arm tooling tasks where a fixed 55mm stroke would bottom out the tool.
Is the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X55-10 the Right Cylinder?
Remember that only the back position is adjustable—your extend end is fixed. Always re-tighten the lock nut after setting the rear screw, as vibration can drift an unlocked mechanism.
Confirm your ordering essentials: 16mm bore, 55mm nominal stroke, 10mm window, no magnet, and your preferred mounting. This cylinder does not hold position on air loss, so add an external stop if fail-safe holding is required.
Quick checklist
- ✓ Need to fine-tune the end position on site
- ✓ Retract end sits within 45–55 mm
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Access to the rear adjuster screw
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Set the adjuster, then re-lock the check nut.
- check Double rod: the rear rod carries the stroke adjuster.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X55-10 FAQ
The effective stroke range is 45-55mm. These forces are identical to a standard PB cylinder of the same bore.
A rear M5x0.8 screw shortens the retract end by up to 10mm, while the extend end is fixed. After setting your desired length, re-tighten the lock nut to prevent vibration drift. The cylinder has no sensor magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBJ Pen-Size Cylinders
Request a Quote for Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X55-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.