Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-50
The AirTAC PBJ Adjustable Pen-Type Cylinder PBJ16X60-50 is a double-acting, double-rod pen-size mini cylinder whose rear rod carries a stroke adjuster. On a Ø16mm bore it gives a nominal 60mm stroke with a 50mm fine-adjustable window — settable from 10 to 60mm, so you set the end position without changing hardware.
- BoreØ16 mm
- Nominal stroke60 mm
- Adjust window50 mm
- Effective range10–60 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-50
The AirTAC PBJ16X60-50 is a double-acting, double-rod pen-size mini cylinder featuring a 50mm adjustable window. A rear adjuster screw (M5x0.8 thread) shortens the retract end, giving an effective stroke range of 10-60mm. You set the exact length on the machine without ordering new hardware. The extend end remains fixed. The air port is M5x0.8 and the rod-end thread is M10x1.0.
The Ø5mm stainless rod and barrel provide a slim profile for tight jigs. A fixed TPU bumper decelerates the last few mm of travel. For a practical safety margin, plan for a working load of about 60N at 0.5MPa, accounting for seal friction and smooth travel.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-50 Technical Specifications
| Model | Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-50 |
|---|---|
| Series | PBJ JIS pen-size adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Rod diameter | Ø5 mm |
| Nominal stroke | 60 mm |
| Adjustable window | 50 mm (10–60 mm) |
| Adjuster thread | M5×0.8 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Elastic bumper (both ends) |
| Max standard stroke | Up to 200 mm |
PBJ is a double-rod cylinder: the rear rod carries the stroke adjuster, which sets the stroke end within the adjustable window. Confirm the set position against the product label before installation.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 90.7 N | 90.7 N |
| 0.7 MPa (max) | 126.9 N | 126.9 N |
The rear rod passes through the rear cover, so both piston faces lose rod area: push is shown at the annular-area value (conservative), lower than a single-rod PB push of the same bore. Size with a friction margin.
Model Code: Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-50
| PBJ | JIS pen-size adjustable-stroke mini-cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Nominal stroke length in mm. |
| -50 | Adjustable-stroke window in mm (10/20/30/40/50/75/100). |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
Fixed body — no separate back-cover code. Mounting accessories: LB, FA. Related PB-family variants: PB (fixed stroke), PBD (double rod), PBR (front-mount).
Where the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-50 Is Used
Changeover Fixtures
Rapidly tune the 10-60mm retract length when swapping product families on a shared jig, skipping the need to physically swap cylinders for different part heights.
Trial Stops
Dial in the exact extend-and-retract distance during prototype testing, locking the M5x0.8 adjuster nut once the optimal contact position is found.
Variable-Depth Insert
Press pins or plugs to precise varying depths using the rear screw, achieving consistent insertion without machining custom spacers for each task.
Is the Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-50 the Right Cylinder?
Remember that only the retract position is field-adjustable; the extend end is fixed. Always re-tighten the lock nut after setting the rear screw to prevent vibration drift.
Confirm your ordering essentials: 16mm bore, 60mm nominal stroke, 50mm adjuster window, no magnet, and your preferred mounting. This plain PBJ cylinder does not hold position on air loss—the piston drifts without live pressure, so add an external stop for fail-safe load holding.
Quick checklist
- ✓ Need to fine-tune the end position on site
- ✓ Retract end sits within 10–60 mm
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Access to the rear adjuster screw
- ✓ Keep the load coaxial — avoid side load
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.7 MPa operating pressure.
- check Set the adjuster, then re-lock the check nut.
- check Double rod: the rear rod carries the stroke adjuster.
- check Keep the load coaxial; avoid side load on the thin rod.
- check Do not dismantle the front or back cover.
Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-50 FAQ
The effective stroke range is 10-60mm (nominal 60mm minus up to a 50mm window).
A rear screw shortens the retract end only, while the extend end remains fixed. After setting your desired length, re-tighten the lock nut to prevent vibration drift. This model has no built-in magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PBJ Pen-Size Cylinders
Request a Quote for Airtac PBJ Adjustable Pen-Type Cylinder PBJ16X60-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.