Airtac PHF Tandem Toggle Joint PHF1004-S
SUS304 stainless variant (-S)The AirTAC Airtac PHF Tandem Toggle Joint PHF1004-S is a genuine universal female elbow for push-in tube connection, rated 0 - 1.0 MPa (0 - 10 kgf/cm2) with a 1.5 MPa proof pressure.
- TypeUniversal female elbow
- SeriesPHF
- Working pressure0 - 1.0 MPa (0 - 10 kgf/cm2)
- Proof pressure1.5 MPa
- Temperature-20 to +70 °C
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PHF Tandem Toggle Joint PHF1004-S
The AirTAC PHF1004-S is a universal female elbow from AirTAC's resin one-touch range, sized for Dia 10mm soft nylon or polyurethane tubing on one leg and a 1/2in PT female thread on the other. It belongs to the 1.0 MPa family, not the 0.9 MPa metal BP line: working pressure 0-1.0 MPa, proof pressure 1.5 MPa, vacuum to -750 mmHg, and a -20 to +70 C operating window. Because the female thread swivels on the elbow axis, you can push the tube home, let the stainless spring gasket and chuck grip it, then rotate the body so the 1/2in port lines up exactly where the pipework lands.
The -S suffix means this SKU carries the SUS304 option for the PHF family: on the PH/PHF group the body stays engineering-grade PBT and the threaded stud is stainless steel 304. That keeps the wetted stud from rusting where condensation, humid shop air or mildly corrosive surroundings attack a plain brass stud, while every pressure, vacuum and temperature figure stays identical to the standard PHF1004. Threads arrive pre-coated with sealant, ready to wind into a PT female port.
Airtac PHF Tandem Toggle Joint PHF1004-S Technical Specifications
| Model | Airtac PHF Tandem Toggle Joint PHF1004-S |
|---|---|
| Type | Universal female elbow |
| Series | PHF |
| Connection | Push-in one-touch |
| Body material | Stainless steel 304 (-S variant) |
| Working pressure | 0 - 1.0 MPa (0 - 10 kgf/cm2) |
|---|---|
| Negative pressure | -750 mmHg (10 Torr) |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Applicable tubing | Soft nylon or polyurethane tube |
| Thread standard | PT (Rc tapered) unless the code says otherwise |
POM release button and chuck, aluminium-alloy guide, stainless spring gasket, NBR O-ring; body brass or PBT depending on the part. Stainless (-S): SUS304 in place of brass - a solid SUS304 body on the PC and POC straight connectors, and a PBT body with a SUS304 stud on the elbow, tee and branch shapes. Working pressure, proof pressure and temperature are unchanged from the standard version. AirTAC publishes flow as a characteristic curve rather than a single figure, so no L/min value is listed.
Model Code: Airtac PHF Tandem Toggle Joint PHF1004-S
| PHF | Universal female elbow. |
|---|---|
| 4 / 6 / 8 / 10 / 12 | Tube outside diameter in mm (3.2 mm exists on the mini series). |
| M5 / 01 / 02 / 03 / 04 | Thread: M5x0.8, 1/8", 1/4", 3/8", 1/2" (M3 on the mini series). |
| D | Black. Blank = grey. |
| -S | Stainless-steel body. |
Fitting & Sealing Notes
- check Cut the tube square and clean before pushing it home, or the seal will leak.
- check Push until it stops, then pull back to check the chuck has gripped.
- check To release, press the collet ring fully in and pull the tube out.
- check Threaded parts arrive with sealant on the thread; M5 sizes use a sealing gasket.
- check Match the tube OD exactly - a 6 mm fitting will not hold 1/4" tube.
Where the Airtac PHF Tandem Toggle Joint PHF1004-S Is Used
Large valve actuator feed in a car-wash plant
Dia 10 tubing carries mains air to a 1/2in-ported diaphragm valve in the wet bay; the SUS304 stud on PHF1004-S resists the constant condensation that pits a plain brass stud.
Bottling line rinse-zone air drop
The swivelling 1/2in PT female thread lets the fitter orient the elbow after inserting Dia 10 tube, so the drop pipe lands square on the machine port without re-bending the run.
Press side manifold connection behind a guard
A 90-degree female elbow reaches a sideways-facing 1/2in port on a pneumatic press manifold where a straight fitting would foul the guard panel, with tool-free Dia 10 tube release for service.
Is the Airtac PHF Tandem Toggle Joint PHF1004-S the Right Part?
On the PHF ladder, 1/2in thread is offered only in Dia 8, Dia 10 and Dia 12 tube. Step down to PHF0804-S if the circuit feeds smaller actuators and you want a lighter, lower-bore path; step up to PHF1204-S when the run carries bulk air to a large cylinder or valve manifold. A Dia 10 tube must seat in a Dia 10 chuck - a 3/8in imperial tube will not seal here, and there is no G or NPT version of this fitting in the AirTAC one-touch catalogue.
Choose a PHF female elbow over a straight PC connector when the 1/2in port points sideways to the tube run: the swivel thread plus the 90-degree turn absorbs both misalignment and direction change in one part, which saves an extra elbow and a joint on large-bore mains where every leak path costs flow.
Quick checklist
- ✓ Tube outside diameter matches exactly
- ✓ Thread size and standard match the port
- ✓ Working pressure within 0 - 1.0 MPa (0 - 10 kgf/cm2)
- ✓ Temperature within -20 to +70 °C
Airtac PHF Tandem Toggle Joint PHF1004-S FAQ
It is a resin-profile universal female elbow: working pressure 0-1.0 MPa (0-10 kgf/cm2), proof pressure 1.5 MPa, negative pressure capability down to -750 mmHg, and a temperature range of -20 to +70 C. It accepts Dia 10mm soft nylon or polyurethane tubing and has a 1/2in PT female thread on a SUS304 stud. The -S suffix changes the stud material only; no pressure or temperature figure differs from the standard PHF1004.
On the PHF family the stainless variant keeps the same PBT body and same dimensions; the threaded stud becomes stainless steel 304. That is the part exposed where the fitting screws into your port, so it is what corrodes first in humid or wash-side environments. No certification, surface finish or corrosion class is published for this option, and there is no 316 or other grade available in this catalogue.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard parts are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC One-Touch Fittings
Request a Quote for Airtac PHF Tandem Toggle Joint PHF1004-S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.