Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X50SR
The AirTAC Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X50SR is a single acting, push type (spring return) pen-size mini cylinder with direct front-cover mounting (M4×0.7 thread). A single air port drives the push stroke on a Ø10mm bore, 50mm stroke; the return spring resets the rod when air is released.
- BoreØ10 mm
- Stroke50 mm
- Port sizeM5×0.8
- Front-mount threadM4×0.7
- Acting typePush, single acting
- ReturnSpring
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X50SR
The AirTAC PSBR10X50SR is a JIS pen-size single-acting push cylinder with a 50 mm stroke. Air entering the M5x0.8 port extends the rod, while an internal spring retracts it automatically. This fail-safe design ensures the rod returns home on air loss. It delivers 29.8 N of net push at 0.5 MPa, with the return spring force already deducted.
The slim SUS316L stainless body bolts directly to your fixture via the front-cover M4x0.7 thread, saving space in tight assemblies. A built-in magnet (-S) enables position sensing with reed or electronic switches. The fixed TPU bumper absorbs end-of-stroke impacts, and the R axial inlet keeps plumbing perfectly in line.
Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X50SR Technical Specifications
| Model | Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X50SR |
|---|---|
| Series | PSBR JIS pen-size front-mount cylinder |
| Bore size | Ø10 mm |
| Rod diameter | Ø4 mm |
| Stroke | 50 mm |
| Acting type | Single acting, push type (spring return) |
| Front-mount thread | M4×0.7 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.2 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Return | Return spring (push by air) |
| Max standard stroke | Up to 60 mm |
The spring holds the rod retracted; applying air pushes the rod out, and removing air lets the spring return it. Front cover carries the mounting thread (M4×0.7); barrel is SUS316L. Forces below are NET spring-deducted values. Confirm against the product label.
Net Push Force (Ø10mm)
| Pressure | Net push force |
|---|---|
| 0.5 MPa | 29.8 N |
| 0.7 MPa (max) | 45.5 N |
These are usable push forces after the return spring is subtracted, from the AirTAC single-acting thrust table. Minimum operating pressure is set by the spring, so this model needs at least the lower pressure shown to move.
Model Code: Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X50SR
| PSBR | JIS pen-size front-mount single acting, push type (spring return) series. |
|---|---|
| 10 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| U / R | Back cover: U 90° side inlet or R axial inlet (bore-dependent). |
Mounting: direct front-cover thread (M4×0.7). Related PBR-family variants: PBR (double acting), PTBR (single-acting pull).
Where the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X50SR Is Used
Panel Pusher
Extends to push a lightweight panel into a machining nest, with the spring safely retracting the 4 mm rod when air is removed.
Part Ejector
Mounts via the front M4x0.7 thread over a belt to push finished parts off the line, relying on fail-safe retract to clear the path.
Clamp Release
Holds a workpiece by extending against it, then releases instantly on air loss as the spring pulls the rod back to clear the fixture.
Is the Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X50SR the Right Cylinder?
This 10 mm bore provides 29.8 N net push at 0.5 MPa and 45.5 N at the 0.7 MPa maximum. If you need less force, the 8 mm bore yields 18.7 N at 0.5 MPa; for heavier jobs, the 12 mm bore offers 42.9 N. The internal spring requires a minimum 0.2 MPa pressure to overcome its resistance before motion begins.
The direct front-cover M4x0.7 thread mounts straight to your tooling. The 50 mm stroke is well within the 60 mm single-acting limit for this bore. Because the rod is a slender 4 mm, add an external guide for off-axis loads over this long stroke. Confirm you need the R axial inlet and the built-in magnet when ordering.
Quick checklist
- ✓ Net push force at your working pressure
- ✓ Bolt directly through the front cover (M4×0.7)
- ✓ Only one air line / solenoid needed
- ✓ Fail-safe retract on air loss
- ✓ Magnet (S) for sensors?
- ✓ Stroke ≤ 60 mm (single-acting limit)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 0.7 MPa operating pressure.
- check Allow for spring force in the stroke direction.
- check Match bolt size and engagement to the front thread.
- check Do not add an external return mechanism.
- check Keep the load coaxial; avoid side load on the thin rod.
Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X50SR FAQ
It provides 29.8 N net push at 0.5 MPa and 45.5 N at the 0.7 MPa maximum. The internal return spring sets a 0.2 MPa minimum pressure needed before the rod can extend, ensuring fail-safe retraction on air loss.
It mounts directly via the front-cover M4x0.7 thread, eliminating brackets for compact jigs. The -S suffix indicates a built-in piston magnet compatible with reed or electronic switches. The SUS316L barrel suits damp environments.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC PSBR Pen-Size Cylinders
Request a Quote for Airtac PSBR Single Acting Square Head Compact Cylinder PSBR10X50SR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.