
The AirTAC Airtac PSBR Single Acting Square Head Compact Cylinder PSBR12X30U is a single acting, push type (spring return) pen-size mini cylinder with direct front-cover mounting (M5×0.8 thread). A single air port drives the push stroke on a Ø12mm bore, 30mm stroke; the return spring resets the rod when air is released.
The AirTAC PSBR12X30U is a JIS pen-size single-acting push cylinder that extends via one M5x0.8 air port and retracts automatically via an internal spring. It supplies 42.9 N of net push at 0.5 MPa, climbing to 65.5 N at the 0.7 MPa maximum. A 90-degree side inlet keeps pneumatic plumbing flat against your fixture.
You bolt this actuator straight to a tool using the direct M5x0.8 front-cover mounting thread, eliminating separate brackets. The SUS316L stainless barrel shrinks the envelope for tight jigs, while a fixed TPU bumper cushions the stroke ends. Plan for roughly 26 N of actual work output, as the thin Ø5 mm rod is built strictly for coaxial thrust rather than side loading.
| Model | Airtac PSBR Single Acting Square Head Compact Cylinder PSBR12X30U |
|---|---|
| Series | PSBR JIS pen-size front-mount cylinder |
| Bore size | Ø12 mm |
| Rod diameter | Ø5 mm |
| Stroke | 30 mm |
| Acting type | Single acting, push type (spring return) |
| Front-mount thread | M5×0.8 |
| Port size | M5×0.8 |
|---|---|
| Operating pressure | 0.2 – 0.7 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Return | Return spring (push by air) |
| Max standard stroke | Up to 75 mm |
The spring holds the rod retracted; applying air pushes the rod out, and removing air lets the spring return it. Front cover carries the mounting thread (M5×0.8); barrel is SUS316L. Forces below are NET spring-deducted values. Confirm against the product label.
| Pressure | Net push force |
|---|---|
| 0.5 MPa | 42.9 N |
| 0.7 MPa (max) | 65.5 N |
These are usable push forces after the return spring is subtracted, from the AirTAC single-acting thrust table. Minimum operating pressure is set by the spring, so this model needs at least the lower pressure shown to move.
| PSBR | JIS pen-size front-mount single acting, push type (spring return) series. |
|---|---|
| 12 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| U / R | Back cover: U 90° side inlet or R axial inlet (bore-dependent). |
Mounting: direct front-cover thread (M5×0.8). Related PBR-family variants: PBR (double acting), PTBR (single-acting pull).
Drives lightweight electronic panels forward out of a test nest using 42.9 N net push, with the spring returning the rod safely when air drops.
Pushes machined pins off a conveyor line; the direct M5x0.8 front mount threads right into the machine frame to save build space.
Overcomes a holding mechanism to unclamp parts, relying on the fixed TPU bumper to soften the impact at the end of the 30 mm travel.
This 12 mm bore with a 30 mm stroke outputs 42.9 N net push at 0.5 MPa. If you need less force, the Ø10 bore provides 29.8 N at the same pressure; stepping up to the Ø16 bore yields 74.8 N. The internal spring dictates a 0.2 MPa minimum pressure before motion begins and guarantees the rod springs back to a fail-safe retracted position on air loss.
Secure the cylinder via the direct M5x0.8 front-cover thread, ensuring proper bolt engagement. This specific configuration includes a U-style 90-degree side inlet for flat routing and lacks a sensor magnet. If your application requires powered extension and retraction, consider the PBR double-acting series instead.
Quick checklist
It delivers 42.9 N of net usable push at 0.5 MPa and 65.5 N at the 0.7 MPa maximum. Because it is spring-return, a minimum of 0.2 MPa is required to overcome the spring before the rod extends.
The actuator bolts directly via an M5x0.8 front-cover thread, removing the need for brackets. The SUS316L stainless barrel provides corrosion resistance in a slim pen-size body, and the U-style back cover offers a 90-degree side inlet for flat pneumatic routing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.