Airtac SAUD Double Rod Cylinder SAUD100X105
The AirTAC SAUD Double Rod Cylinder SAUD100X105 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 105mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke105 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X105
The AirTAC SAUD100X105 is a double-acting, double-rod profile cylinder with a 100 mm bore and 105 mm stroke. A 25 mm rod exits both ends, making the push and pull force equal at 3681 N each way at 0.5 MPa. The extruded hard-anodized aluminum barrel keeps the unit shorter than a standard ISO 15552 cylinder of the same bore.
This SKU has no internal magnet, so it cannot carry CMSG or DMSG sensors. The 1/2 inch port feeds a 29 mm adjustable air cushion at each end. A Viton H seal option extends operation to 150 C.
Airtac SAUD Double Rod Cylinder SAUD100X105 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X105 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X105
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X105 Is Used
Twin-Tool Stamping
Drives two synchronized forming tools from one piston, ensuring parallel contact on heavy sheet metal work.
Anti-Rotation Lifting
Lifts heavy jigs straight up without mechanical twist, using the dual rods to prevent platform yaw.
Dual-End Transfer
Pushes a product forward while simultaneously retracting a return fixture on the back side for cycle pacing.
Is the Airtac SAUD Double Rod Cylinder SAUD100X105 the Right Cylinder?
Choose this 100 mm bore when you need 3681 N of equal force both directions. If you need less power, step down to the 80 mm bore for 2268 N. If you need more, 100 mm is the largest available SAUD size. The double-rod design is ideal for anti-rotation guidance or driving twin tools. Mounting uses FA flange or LB foot brackets compatible with the AirTAC SC series. Since this stroke is only 105 mm, side-load guide stress is minimal. Note this non-magnet SKU cannot support switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X105 FAQ
Because the 25 mm rod exits both ends, force is equal in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. It uses a 1/2 inch port.
No. The air cushions only decelerate the piston near stroke end; they do not lock the load. For vertical load holding on air loss, you must add an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X105
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.