Airtac SAUD Double Rod Cylinder SAUD100X105S
The AirTAC SAUD Double Rod Cylinder SAUD100X105S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 105mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke105 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X105S
The AirTAC SAUD100X105S is a double-acting, double-rod profile cylinder. A rod protrudes from both ends, meaning the push and pull forces are identical at 3681 N each way at 0.5 MPa. The extruded aluminium barrel makes it shorter than an ISO 15552 cylinder of the same bore.
This unit includes the -S magnet option for CMSG, DMSG, or EMSG switches. The 1/2" port and M20x1.5 rod thread handle robust duty. A Viton H seal can raise the operating temperature to 150 C.
Airtac SAUD Double Rod Cylinder SAUD100X105S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X105S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X105S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X105S Is Used
Twin-Tool Stamping
Drives two synchronized forming tools simultaneously from opposite rod ends, ensuring perfectly balanced hitting force.
Anti-Rotation Lifting
Raises and lowers heavy platens without twisting, using the dual rods for inherent mechanical guidance.
Cam-Triggered Clamping
Uses the rear protruding rod to trip an external limit switch, confirming clamp engagement independently.
Is the Airtac SAUD Double Rod Cylinder SAUD100X105S the Right Cylinder?
Select this 100 mm bore when you need 3681 N of equal force in both directions. If you need less power, step down to the 80 mm bore providing 2268 N. If you require more, this is the largest standard size available. The double-rod design is ideal for anti-rotation guidance, driving twin tooling, or mounting a sensor cam on the back rod. Mounting is limited to Basic, FA, and LB types compatible with the AirTAC SC series. Because the 105 mm stroke is short, side-load risks are minimal, but always guide the load externally on longer strokes. The -S suffix enables electronic or reed sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X105S FAQ
Because it is a double-rod cylinder, the force is equal in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The 1/2" port supplies the air volume for these figures.
No, the air cushion only decelerates the piston near the stroke end and does not act as a brake. The piston will drift on air loss. Use an external rod lock or pilot-operated check valve for secure load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X105S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.