Airtac SAUD Double Rod Cylinder SAUD100X110
The AirTAC SAUD Double Rod Cylinder SAUD100X110 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 110mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke110 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X110
The AirTAC SAUD100X110 is a double-acting, double-rod profile cylinder. A rod protrudes from both ends, meaning the push and pull output is identical at 3681 N each way at 0.5 MPa. The extruded hard-anodized aluminum barrel keeps the unit shorter than a standard ISO 15552 cylinder of the same 100 mm bore. It features a 1/2 inch port and M20x1.5 rod threads.
This twin-rod layout provides excellent anti-rotation guidance and lets you drive two tools at once. A high-temperature Viton H seal option can extend operation from -20 to +150 C. Note this SKU lacks a magnet and cannot carry a sensor.
Airtac SAUD Double Rod Cylinder SAUD100X110 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X110 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X110
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X110 Is Used
Twin-Spindle Drilling
Drives two synchronized machining spindles from opposite rod ends, ensuring perfectly balanced feed rates without rotational twist.
Dual Transfer Pushers
Pushes pallets in alternating directions on parallel conveyor lines using a single compact actuator body.
Heavy Press Damping
Applies 3681 N of equal clamping force to seat heavy components, utilizing the 29 mm adjustable cushions to soften end impacts.
Is the Airtac SAUD Double Rod Cylinder SAUD100X110 the Right Cylinder?
Choose this 100 mm bore if you need substantial equal bidirectional force. Sizing down, the 80 mm bore yields 2268 N each way at 0.5 MPa, which may be insufficient for heavy lifting. Sizing up is not possible as 100 mm is the largest available SAUD bore. The twin-rod design is the right call when you need strict non-rotating accuracy or wish to mount tooling on both faces. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. Because this stroke is only 110 mm, side-load stress is minimal, but always guide the load externally on longer strokes. Select the -S magnet variant if you ever require position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X110 FAQ
The force is equal in both directions because it is a double-rod design. It outputs 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. Never expect a larger single-rod push value from this unit.
No, a plain double-rod cylinder drifts without live air; the adjustable cushions only decelerate near stroke end and do not act as a brake. For secure load holding, you must fit an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X110
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.