Airtac SAUD Double Rod Cylinder SAUD100X110S
The AirTAC SAUD Double Rod Cylinder SAUD100X110S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 110mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke110 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X110S
The AirTAC SAUD100X110S is a double-acting, double-rod profile cylinder. A 25mm rod exits both ends of the hard-anodized extruded aluminum barrel, meaning both faces use the rod-side piston area. This yields exactly 3681 N of thrust and pull each way at 0.5 MPa. The design is inherently shorter than an ISO 15552 unit of the same bore.
Because the rear rod protrudes, it easily carries a switch cam or drives a second tool. This -S variant includes a piston magnet for CMSG, DMSG or EMSG sensors. Operating speed spans 30-800 mm/s. The 1/2 inch port matches the 100mm bore.
Airtac SAUD Double Rod Cylinder SAUD100X110S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X110S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X110S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X110S Is Used
Twin-Spindle Machining
Drives two synchronized machining heads from one piston, keeping feed forces perfectly balanced across both ends of the stroke.
Dual Transfer Pusher
Pushes parts from one lane to another using the front rod, while the rear rod trips an external mechanical limit switch.
Lift-and-Place Escapement
Raises and lowers heavy palletized fixtures with equal force, relying on the twin rods to prevent binding under offset loads.
Is the Airtac SAUD Double Rod Cylinder SAUD100X110S the Right Cylinder?
Select this 100mm bore if your application demands high equal force both ways and strict anti-rotation guidance. Stepping down to the 80mm bore yields 2268 N each way, while no larger standard bore exists. The 110mm stroke is well under the 1500mm maximum, so no external side-load guide is strictly required here, though external supports help if carrying heavy twin tooling. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. The -S magnet enables position sensing, and a Viton H seal can raise the operating ceiling to 150 C.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X110S FAQ
Force is equal in both directions because a 25mm rod exits both ends. It produces 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The 1/2 inch port feeds both chambers at speeds of 30-800 mm/s.
No, a plain double-rod cylinder drifts without live air; the 29mm adjustable cushions only decelerate near stroke end. For true load holding, add an external rod lock or pilot-operated check valve. The -S magnet works with CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X110S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.