Airtac SAUD Double Rod Cylinder SAUD100X115
The AirTAC SAUD Double Rod Cylinder SAUD100X115 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 115mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke115 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X115
The AirTAC SAUD100X115 is a double-acting, double-rod profile cylinder. A rod protrudes from both ends, meaning the push and pull force is identical at 3681 N each way at 0.5 MPa. The extruded aluminum barrel keeps the unit shorter than an ISO 15552 cylinder of the same bore. This specific SKU has no magnet and cannot accept sensors.
With a 100 mm bore, the 1/2" port feeds a 25 mm rod with an M20x1.5 thread. A 29 mm adjustable air cushion decelerates the piston at both ends, though a pilot-operated check valve is required to hold a load without live air.
Airtac SAUD Double Rod Cylinder SAUD100X115 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X115 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X115
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X115 Is Used
Twin-Spindle Drilling
Drives two synchronized machining spindles from one piston, ensuring perfectly balanced feed rates without rotational twist.
Dual Pusher Array
Mounts opposing pusher fingers on both rod ends to divert products on parallel conveyor lanes simultaneously.
Pallet Lift Station
Lifts heavy pallets vertically using the equal both-ways force, relying on external guides for stability during elevation.
Is the Airtac SAUD Double Rod Cylinder SAUD100X115 the Right Cylinder?
Choose this 100 mm bore delivering 3681 N equal force when you need synchronized twin-tool actuation or anti-twist guidance. If you need less force, step down to the 80 mm bore (2268 N both ways); if you need more, this is the largest standard SAUD size. Mounting is limited to Basic, FA, and LB styles matching the AirTAC SC series. Because this is a non-magnet SKU, it cannot host CMSG or DMSG switches. For any stroke over 300 mm, use external guide rails to prevent side-load wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X115 FAQ
The force is equal in both directions due to the double-rod design. It outputs 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The 1/2 inch port supplies the 25 mm rod to achieve these figures.
No, this specific SKU lacks a magnet and cannot take CMSG, DMSG, or EMSG switches. You would need the -S variant for sensing, and you can use the back rod to trip an external mechanical switch if needed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X115
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.