Airtac SAUD Double Rod Cylinder SAUD100X135
The AirTAC SAUD Double Rod Cylinder SAUD100X135 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 135mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke135 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X135
The AirTAC SAUD100X135 is a double-acting, double-rod profile cylinder with a 100 mm bore and 135 mm stroke. A rod protrudes from both ends, meaning the push and pull forces are identical at 3681 N each way at 0.5 MPa. The extruded aluminium barrel is shorter than an equivalent standard ISO 15552 unit, and it features adjustable 29 mm air cushions at both ends.
Because both faces use the rod-side area, this cylinder delivers equal thrust in both directions. This SKU lacks a magnet, so it cannot take CMSG or DMSG sensors. Operating pressure is 0.15-1.0 MPa, and a Viton H seal option raises the temperature limit to 150 C.
Airtac SAUD Double Rod Cylinder SAUD100X135 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X135 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X135
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X135 Is Used
Twin-Tool Stamping
Drives two synchronized forming tools from one piston, ensuring parallel contact and equal 3681 N thrust on both the advance and return strokes.
Dual-End Transfer
Pushes a product from one conveyor lane to another using the front rod, while the back rod simultaneously retracts a diverter cam.
Is the Airtac SAUD Double Rod Cylinder SAUD100X135 the Right Cylinder?
Choose this 100 mm bore if you need 3681 N of equal force both ways. Sizing down, the 80 mm bore provides 2268 N, while sizing up is not available as 100 mm is the largest standard SAUD option. The double-rod architecture is ideal for anti-rotation guidance, driving twin tooling, or mounting a cam on the back rod. You can mount it using basic, FA flange, or LB foot brackets compatible with the AirTAC SC series. At 135 mm stroke, side loads are minimal, but external guides are recommended for longer travels. Remember this non-magnetic SKU cannot host a sensor.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X135 FAQ
The force is equal both ways because of the double-rod design. It outputs 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The 1/2 inch port supplies air to both chambers.
No, a plain cylinder drifts without live air, and the 29 mm cushion only decelerates near the stroke end. For a held load, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X135
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.