Airtac SAUD Double Rod Cylinder SAUD100X150
The AirTAC SAUD Double Rod Cylinder SAUD100X150 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 150mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke150 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X150
The AirTAC SAUD100X150 is a double-acting, double-rod profile cylinder with a 100mm bore and 150mm stroke. A rod exits both ends, meaning push and pull forces are identical at 3681 N each way at 0.5 MPa. The extruded aluminum barrel is shorter than an ISO 15552 cylinder of the same bore. It features a 1/2 inch port, M20x1.5 rod thread, and 29mm adjustable air cushions at each end.
This twin-rod design provides excellent anti-rotation guidance and lets you drive two tools at once. Without the -S suffix, this SKU cannot take a magnetic sensor.
Airtac SAUD Double Rod Cylinder SAUD100X150 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X150 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X150
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X150 Is Used
Twin-Spindle Machining
Drives two synchronized machining heads from opposite rod ends with identical 3681 N force to prevent yaw during cutting.
Dual-End Transfer
Pushes a workpiece from one belt to another using the front rod while the rear rod simultaneously retracts a diverter.
Balanced Pressing
Applies equal downward and upward clamping pressure in a test fixture, using the matching rod-side area to eliminate force bias.
Is the Airtac SAUD Double Rod Cylinder SAUD100X150 the Right Cylinder?
Choose this 100mm bore if you need 3681 N of equal bidirectional force. Sizing down, the 80mm bore yields 2268 N, while stepping up is impossible as 100mm is the largest available. A double rod is the right call for anti-twist guidance or twin-tool duty. Mounting is limited to Basic, FA flange, and LB foot types, matching the AirTAC SC series. Because this SKU lacks the -S magnet, you cannot mount CMSG or DMSG switches. For any stroke over 300mm, use external guides to prevent side-load wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X150 FAQ
Because the piston rod exits both ends, the force is equal in both directions. It generates 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The 1/2 inch port supplies air to both chambers.
No. The air cushions only decelerate the piston near the stroke end; they do not act as a brake. If air is lost, the load will drift. Use an external rod lock or a pilot-operated check valve for secure load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.