Airtac SAUD Double Rod Cylinder SAUD100X150S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD100X150S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 150mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke150 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X150S
The AirTAC SAUD100X150S is a double-acting, double-rod profile cylinder. A 25mm rod exits both ends, meaning push and pull force is equal at 3681N each way at 0.5MPa. The 1/2inch port feeds the 100mm bore. This extruded aluminium body is shorter than an ISO 15552 unit of the same size.
With the -S suffix, this model includes a piston magnet for CMSG, DMSG or EMSG switches. The back rod can also carry a sensor cam. Viton H seals can raise the operating temperature to 150C.
Airtac SAUD Double Rod Cylinder SAUD100X150S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X150S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X150S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X150S Is Used
Twin-Spindle Drilling
Drives two synchronized machining heads from one piston, ensuring perfectly balanced feed rates without torsional twist.
Dual Transfer Pushers
Pushes a product from one belt to another using the front rod while the rear rod simultaneously retracts a diverter gate.
Balanced Vertical Press
Applies an even 3681N clamping force downward and lifts the same load upward, maintaining precise vertical stability.
Is the Airtac SAUD Double Rod Cylinder SAUD100X150S the Right Cylinder?
Choose this 100mm bore if you need 3681N of equal bidirectional force. Sizing down, the 80mm bore provides 2268N both ways. Sizing up is not available as 100mm is the maximum. A double rod is ideal for anti-rotation guidance, driving twin tooling, or back-end sensing. Mounting uses FA flange or LB foot brackets compatible with the AirTAC SC series. At 150mm stroke, side loads are minimal, but external guides should always support the load. The -S magnet enables electronic position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X150S FAQ
Because the 25mm rod exits both ends, force is equal in both directions: 3681N at 0.5MPa, 5153N at 0.7MPa, and 6626N at 0.9MPa. It uses a 1/2inch port.
No, the adjustable 29mm air cushions only decelerate the piston near stroke end. To prevent drift on air loss, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X150S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.